Armstrong® 25-018 Open End Regular Length Combination Wrench, 9/16 in, 6 Points, 15 deg Offset, 7.09 in OAL, High Alloy Steel, Polished Chrome, ASME B107.6-1994
Armstrong® 25-018 Open End Regular Length Combination Wrench, 9/16 in, 6 Points, 15 deg Offset, 7.09 in OAL, High Alloy Steel, Polished Chrome, ASME B107.6-1994
-
BrandArmstrong®
-
UPC781412250183
-
Manufacturer Part Number25-018
-
CountryUSA
-
Finish/CoatingPolished Chrome
-
MaterialHigh Alloy Steel
-
Measurement SystemImperial
-
TypeOpen End Regular Length
-
Wrench Opening9/16 in
-
Number of Points6
-
Specifications MetASME B107.6-1994
-
Offset Angle15 deg
-
Open End Thickness0.29 in
-
Open End Width1.14 in
-
Overall Length7.09 in
-
Box End Thickness0.35 in
-
Box End Width0.89 in
- Box ends incorporate a radius corner design that engages the flats of the fastener, not the corners, providing up to 15 to 20% more torque while reducing fastener rounding, enhancing the turning of worn fasteners
- Box ends are offset a true 15 deg for clearing obstructions and knuckle clearance on flat surfaces
- Open end has a radius design for greater strength; especially when compared to a hex open end
- Large size stamp on both sides of the wrench for ease in identification
- Full polish chrome finish provides smooth edges with a high luster
- Manufactured from high alloy steel using the most up-to-date manufacturing process and heat treat for greater strength and durability
| Competitor Name | Competitor Part Number |
|---|---|
| MSC | 86998572 |
-
UNSPSC27111713
-
Standards/ApprovalsUS Federal Specification GGG-W-636E
Recently Viewed
Armstrong® 25-018 Open End Regular Length Combination Wrench, 9/16 in, 6 Points, 15 deg Offset, 7.09 in OAL, High Alloy Steel, Polished Chrome, ASME B107.6-1994
Armstrong® 25-018 Open End Regular Length Combination Wrench, 9/16 in, 6 Points, 15 deg Offset, 7.09 in OAL, High Alloy Steel, Polished Chrome, ASME B107.6-1994
8-MM 6-PT 3/8" -DRIVE UNIVERSAL IMPACT-GRY1008UM >
CW-1-9/16 1-9/16" 12-pt Chrome Comb/wrenches
1-9/16" 12-PT CHROME COMB/WRENCHES -TABCW19/16 >
CW-1-1/8 1-1/8" 12-pt Chrome Combination
1-1/8" 12-PT CHROME COMBINATION WRENCH-TABCW118 >
GEARWRENCH® 82306 Punch and Chisel Set, Center/Cold/Long Taper/Pin/Starting Style, 1/4 to 1 in Chisel, 15/16 to 3/8 in Punch, 19 Punches, 8 Chisels, 27 Pieces
The GEARWRENCH 27-piece punch and chisel set includes: 8 cold chisels, 3 center punches, 6 pin punches, 4 long taper (drift) punches, 6 starter punches, and a cloth tool roll for storage. Use these cold chisels for cutting metal rivets, bolts, and nuts. Use the pin punch to drive out pins and rivets during final removal. The center punch is used for marking center lines, and pilot drill locations, while long taper punches are used to install and remove pins and shafts and to align holes. Use starter punches for both starting and installing pins and rivets.
Armstrong® 25-014 Open End Regular Length Combination Wrench, 7/16 in, 6 Points, 15 deg Offset, 5.8 in OAL, High Alloy Steel, Polished Chrome, ASME B107.6-1994
Armstrong® 25-014 Open End Regular Length Combination Wrench, 7/16 in, 6 Points, 15 deg Offset, 5.8 in OAL, High Alloy Steel, Polished Chrome, ASME B107.6-1994
