Armstrong® 25-014 Open End Regular Length Combination Wrench, 7/16 in, 6 Points, 15 deg Offset, 5.8 in OAL, High Alloy Steel, Polished Chrome, ASME B107.6-1994
Armstrong® 25-014 Open End Regular Length Combination Wrench, 7/16 in, 6 Points, 15 deg Offset, 5.8 in OAL, High Alloy Steel, Polished Chrome, ASME B107.6-1994
-
BrandArmstrong®
-
UPC781412250145
-
Manufacturer Part Number25-014
-
CountryUSA
-
Finish/CoatingPolished Chrome
-
MaterialHigh Alloy Steel
-
Measurement SystemImperial
-
TypeOpen End Regular Length
-
Wrench Opening7/16 in
-
Number of Points6
-
Specifications MetASME B107.6-1994
-
Offset Angle15 deg
-
Open End Thickness0.24 in
-
Open End Width0.9 in
-
Overall Length5.8 in
-
Box End Thickness0.3 in
-
Box End Width0.68 in
- Box ends incorporate a radius corner design that engages the flats of the fastener, not the corners, providing up to 15 to 20% more torque while reducing fastener rounding, enhancing the turning of worn fasteners
- Box ends are offset a true 15 deg for clearing obstructions and knuckle clearance on flat surfaces
- Open end has a radius design for greater strength; especially when compared to a hex open end
- Large size stamp on both sides of the wrench for ease in identification
- Full polish chrome finish provides smooth edges with a high luster
- Manufactured from high alloy steel using the most up-to-date manufacturing process and heat treat for greater strength and durability
-
UNSPSC27111713
-
Standards/ApprovalsUS Federal Specification GGG-W-636E
-
Warranty1 Year
Recently Viewed
Armstrong® 25-014 Open End Regular Length Combination Wrench, 7/16 in, 6 Points, 15 deg Offset, 5.8 in OAL, High Alloy Steel, Polished Chrome, ASME B107.6-1994
Armstrong® 25-014 Open End Regular Length Combination Wrench, 7/16 in, 6 Points, 15 deg Offset, 5.8 in OAL, High Alloy Steel, Polished Chrome, ASME B107.6-1994
Starrett® 70A Pocket Scriber With 2-3/8 in Long Point, Steel Tapered Tip, Knurled Grip Handle, 5 in L
The handle is made of steel, knurled and nickel plated. The scriber point is steel, properly hardened and finely tapered so the location of the point is not obscured. The scriber is held firmly in the handle by a knurled chuck and when not in use can be reversed, telescoped into the handle, and locked by the chuck. The hexagon-shaped head prevents rolling.
Bussmann NON-60 Non-Current Limiting One Time Fuse, 60 A, 250 VAC, 125 VDC, 50 kA Interrupt, Class: H/K5, Cylindrical Body
Bussmann NON-60 Non-Current Limiting One Time Fuse, 60 A, 250 VAC, 125 VDC, 50 kA Interrupt, Class: H/K5, Cylindrical Body
24 ALUMINUM PIPE WRENCH-JET220524 >
10-32" X 1" SAE SOCKET SET SCREWS-HOL33068>
4-1/2" -IDX4-7/8" -OD O-RINGS
