Armstrong® 25-464 Long Length Open End Combination Wrench, 7/16 in, 12 Points, 15 deg Offset, 7-1/4 in OAL, High Alloy Steel, Satin Chrome, ASME B107.6-1994
Armstrong® 25-464 Long Length Open End Combination Wrench, 7/16 in, 12 Points, 15 deg Offset, 7-1/4 in OAL, High Alloy Steel, Satin Chrome, ASME B107.6-1994
-
BrandArmstrong®
-
UPC781412254648
-
Manufacturer Part Number25-464
-
CountryUSA
-
Finish/CoatingSatin Chrome
-
MaterialHigh Alloy Steel
-
Measurement SystemImperial
-
TypeLong Length Open End
-
Head Angle15 deg
-
Wrench Opening7/16 in
-
Number of Points12
-
Specifications MetASME B107.6-1994
-
Offset Angle15 deg
-
Open End Thickness0.21 in
-
Open End Width0.95 in
-
Overall Length7-1/4 in
-
Box End Thickness0.29 in
-
Box End Width0.67 in
- Box ends incorporate a radius corner design that engages the flats of the fastener, not the corners, providing up to 15 to 20% more torque while reducing fastener rounding, enhancing the turning of worn fasteners
- Box ends are offset a true 15 deg for clearing obstructions and knuckle clearance on flat surfaces
- The shank to box end transition area is also reinforced to provide greater strength
- Open end has a radius design for greater strength, especially when compared to a hex open end
- Large size stamp on both ends of the wrench and both sides of the wrench for ease in identification
- Manufactured from high alloy steel using the most up-to-date manufacturing process and heat treat for greater strength and durability
- Satin chrome finish provides smooth edges with a bright appearance
| Competitor Name | Cross-Reference Number |
|---|---|
| MSC | 00481952 |
-
UNSPSC27111713
-
Standards/ApprovalsUS Federal Specification GGG-W-636E
Recently Viewed
Armstrong® 25-464 Long Length Open End Combination Wrench, 7/16 in, 12 Points, 15 deg Offset, 7-1/4 in OAL, High Alloy Steel, Satin Chrome, ASME B107.6-1994
Armstrong® 25-464 Long Length Open End Combination Wrench, 7/16 in, 12 Points, 15 deg Offset, 7-1/4 in OAL, High Alloy Steel, Satin Chrome, ASME B107.6-1994
3/16" ALUMINUM RIVETS STEEL MANDREL-RIVA/S66D >
3/16" STEEL RIVETS#4499-MRS50147 >
Browning® 1079284 Split Taper Bushing, 1-5/8 in Dia Bore, 2.7032 in Small End/2.875 in Large End Dia Barrel, 4-1/8 in Dia Flange, 3-1/2 in OAL, Sintered Steel
External key provides positive drive with no torque on the cap screws. We offer high torque carrying capacity. Double split barrel improves true concentricity. The shaft is gripped with positive clamp fit.
Milwaukee® 48-27-1121 Flat Boring Bit, 1-1/8 in Dia, 6-3/8 in OAL, Flat Flute, 1/4 in Shank
Bore small, clean holes at any angle in a variety of materials with the economical Milwaukee® 1-1/8 in. x 6 in. flat boring bit. This premium quality flat boring bit is made of heat-treated high carbon steel, so the drill point and cutting edge can be resharpened for cost savings and long life. Bore clean, fast holes at any angle in wood, plastic, plywood and Formica. This bit offers a 6 in. drilling depth but can be used with a 12 in. extension (48-28-3350) for extended deep-hole drilling.
BBI 349014 Regular Split Lock Washer, 7/8 in Nominal, Alloy Steel, Zinc CR+3
