Armstrong® 25-020 Open End Regular Length Combination Wrench, 5/8 in, 6 Points, 15 deg Offset, 7.95 in OAL, High Alloy Steel, Polished Chrome, ASME B107.6-1994
Armstrong® 25-020 Open End Regular Length Combination Wrench, 5/8 in, 6 Points, 15 deg Offset, 7.95 in OAL, High Alloy Steel, Polished Chrome, ASME B107.6-1994
-
BrandArmstrong®
-
UPC781412250206
-
Manufacturer Part Number25-020
-
CountryUSA
-
Finish/CoatingPolished Chrome
-
MaterialHigh Alloy Steel
-
Measurement SystemImperial
-
TypeOpen End Regular Length
-
Wrench Opening5/8 in
-
Number of Points6
-
Specifications MetASME B107.6-1994
-
Offset Angle15 deg
-
Open End Thickness0.31 in
-
Open End Width1.29 in
-
Overall Length7.95 in
-
Box End Thickness0.39 in
-
Box End Width0.98 in
- Box ends incorporate a radius corner design that engages the flats of the fastener, not the corners, providing up to 15 to 20% more torque while reducing fastener rounding, enhancing the turning of worn fasteners
- Box ends are offset a true 15 deg for clearing obstructions and knuckle clearance on flat surfaces
- Open end has a radius design for greater strength; especially when compared to a hex open end
- Large size stamp on both sides of the wrench for ease in identification
- Full polish chrome finish provides smooth edges with a high luster
- Manufactured from high alloy steel using the most up-to-date manufacturing process and heat treat for greater strength and durability
-
UNSPSC27111713
-
Standards/ApprovalsUS Federal Specification GGG-W-636E
-
Warranty1 Year
Recently Viewed
Armstrong® 25-020 Open End Regular Length Combination Wrench, 5/8 in, 6 Points, 15 deg Offset, 7.95 in OAL, High Alloy Steel, Polished Chrome, ASME B107.6-1994
Armstrong® 25-020 Open End Regular Length Combination Wrench, 5/8 in, 6 Points, 15 deg Offset, 7.95 in OAL, High Alloy Steel, Polished Chrome, ASME B107.6-1994
7BA3/8" PB CHUCK 0-.250" 3/8-24-JAC6255 >
Milwaukee® 48-20-5125 Heavy Duty Thick Wall Core Bit, 1-1/2 in Drill - Fraction, 1.5 in Drill - Decimal Inch
Milwaukee®'s SDS Max and Spline thick wall core bits are used for drilling large through holes into brick, block, concrete. Includes core bit, guide plate, and centering pin.
Milwaukee® 48-20-3974 4-Cutter Rotary Hammer Drill Bit, 1-1/4 in Drill Bit, 45/64 in SDS-Max Shank, 31 in D Cutting, Carbide Cutting Edge, 36 in OAL
The MILWAUKEE® MX4™ 4-Cutter SDS Max Rotary Hammer Drill Bits with solid head carbide deliver up to 5x longer life in concrete with rebar. Engineered with rebar guards to provide maximum durability in hard aggregate and rebar. Milwaukee designed their MX4™ 4-Cutter bits with sharp centering tips for exact spot drilling in concrete. The integrated 4-cutter design prevents lock-up in rebar, reducing downtime. Optimized flutes remove dust faster, reducing heat and delivering up to 15% more holes per battery charge. The wear mark indicator on each drill bit shows you when they no longer meet the ANSI requirement. These MILWAUKEE® MX4™ 4-Cutter Drill Bits are ideal for concrete with rebar and masonry applications.
Apex® 49-B-25IPX Screwdriver Bit, 25IP Torx Plus® Point, 3.5 in OAL
RIDGID® 45265 Set Screw, For Use With: Model 918 Roll Groover, Model 300, 300A Power Drive, Model 300 Compact, 1224 Pipe and Bolt Threading Machine and Model 918-I Integral Roll Groover, 5/16-24 x 1/2 in
RIDGID® 45265 Set Screw, For Use With: Model 918 Roll Groover, Model 300, 300A Power Drive, Model 300 Compact, 1224 Pipe and Bolt Threading Machine and Model 918-I Integral Roll Groover, 5/16-24 x 1/2 in
