Proto Tools 3/4" 12-PT COMBINATION GEARWRENCH PRO J-SC-V-24-T
Proto® JSCV24T Reversible Spline Combination Wrench, 3/4 in Wrench, 12 Points, 15 deg Offset, 9-3/4 in OAL, Forged Steel, Full Polished, ASME Specified
-
BrandProto®
-
UPC662679114534
-
Manufacturer Part NumberJSCV24T
-
CountryUSA|Canada
-
Finish/CoatingFull Polished
-
MaterialForged Steel
-
Measurement SystemImperial
-
TypeReversible Spline
-
Wrench Opening3/4 in
-
Number of Geared Teeth72
-
Wrench TypeRatcheting
-
Number of Points12
-
Specifications MetASME Specified
-
Offset Angle15 deg
-
Open End Thickness1/4 in
-
Open End Width1-9/16 in
-
Overall Length9-3/4 in
-
Box End Thickness1/4 in
-
Box End Width1-21/64 in
- Fractional spline wrenches can be used on fractional 4, 6, 12 point spline and Torx fasteners
- Spline design was created for use with specialty spline bolts which are used when weight and size of bolt heads must be minimized
- Spline design enables the wrench to contact conventional fasteners away from the corners, which applies force over a larger area, reducing risk of fastener scoring and helps prevent rounding of the corners and other fasteners damage that could lead to foreign object damage (FOD)
- The high contact surface area which is away from fastener points enables turning of highly rounded fasteners
| Competitor Name | Cross-Reference Number |
|---|---|
| Berkshire eSupply | KP4215840 |
-
Alternative Part Number16730484
-
UNSPSC27111713
-
IDEA Index ID16730484
-
Package DescriptionEACH
Recently Viewed
Proto® JSCV24T Reversible Spline Combination Wrench, 3/4 in Wrench, 12 Points, 15 deg Offset, 9-3/4 in OAL, Forged Steel, Full Polished, ASME Specified
Irwin® Hanson® 1234 Straight Flute Tap, Right Hand Cutting, #12-32 Thread, Bottoming Chamfer, 4 Flutes, High Carbon Steel
Square D™ 8910DPA33V09 3-Phase Electromechanical Type DPA Definite Purpose Contactor, 208/220/240 V AC V Coil, 30 A, 3NO Contact, 3 Poles
8910DP definite purpose magnetic contactors are designed for heating, air conditioning and refrigeration applications. This line of definite purpose contactors has current ratings up to 120 amperes resistive and 50 HP at 600 VAC. This three pole definite purpose contactor has a full load rating of 30 ampere and a resistive rating of 40 amperes. It also has a 2 HP at 115 VAC single phase, 5 HP at 230 VAC single phase and 10 HP at 230 VAC three phase, 15 HP at 460 VAC three phase and 20 HP at 575 VAC three phase. The nonreplaceable coil is available with a variety of coil voltages. This device has a 208/240 VAC 60 Hz, 220 VAC 50 Hz coil. The contactor has straight through wiring. Contactor is 3.75 inches by 2.37 inches and 3.00 tall. These contactors are UL component recognized and CSA certified.
7-MM X 1.00 THREAD REPAIR KITS-THR1221307>
SMALL MAG DRILL ASSEMBLY-MWK427020 >
40-LBS CONCRETE RESURFACER-M-D89854>
