Armstrong® 25-006 Open End Regular Length Combination Wrench, 3/16 in, 6 Points, 15 deg Offset, 3.188 in OAL, High Alloy Steel, Polished Chrome, ASME B107.6-1994
Armstrong® 25-006 Open End Regular Length Combination Wrench, 3/16 in, 6 Points, 15 deg Offset, 3.188 in OAL, High Alloy Steel, Polished Chrome, ASME B107.6-1994
-
BrandArmstrong®
-
UPC781412250060
-
Manufacturer Part Number25-006
-
CountryUSA
-
Finish/CoatingPolished Chrome
-
MaterialHigh Alloy Steel
-
Measurement SystemImperial
-
TypeOpen End Regular Length
-
Handle TypeFlat
-
Head Angle15 deg
-
Wrench Opening3/16 in
-
Number of Points6
-
Specifications MetASME B107.6-1994
-
Offset Angle15 deg
-
Open End Thickness0.14 in
-
Open End Width0.461 in
-
Overall Length3.188 in
-
Box End Thickness0.156 in
-
Box End Width0.344 in
- Box ends incorporate a radius corner design that engages the flats of the fastener, not the corners, providing up to 15 to 20% more torque while reducing fastener rounding, enhancing the turning of worn fasteners
- Box ends are offset a true 15 deg for clearing obstructions and knuckle clearance on flat surfaces
- Open end has a radius design for greater strength; especially when compared to a hex open end
- Large size stamp on both sides of the wrench for ease in identification
- Full polish chrome finish provides smooth edges with a high luster
- Manufactured from high alloy steel using the most up-to-date manufacturing process and heat treat for greater strength and durability
| Competitor Name | Competitor Part Number |
|---|---|
| MSC | 86998481 |
-
UNSPSC27111713
-
Standards/ApprovalsUS Federal Specification GGG-W-636E
Recently Viewed
Armstrong® 25-006 Open End Regular Length Combination Wrench, 3/16 in, 6 Points, 15 deg Offset, 3.188 in OAL, High Alloy Steel, Polished Chrome, ASME B107.6-1994
Armstrong® 25-006 Open End Regular Length Combination Wrench, 3/16 in, 6 Points, 15 deg Offset, 3.188 in OAL, High Alloy Steel, Polished Chrome, ASME B107.6-1994
3/8" -HOSEX6-FLAT FACE 90 FEMALE-MHDE0606FF90 >
COLD CHISEL-MAY66106>
2" -OVERALL LENGTH COMPRESSION SPRINGS; MAXIMUM LOAD 1.21 LBS.-AJA69X >
SDS Plus 2 cutter drill bits have a strong tapered core to help resist flute breaks, especially when drilling deep holes. For optimal drilling speeds, the two stage flute design features a variable helix pattern that quickly moves debris away from the contact zone. Plus, the two sharp, carbide cutting edges deliver clean, round holes for secure anchor installation. These bits are made in Germany and are GUARANTEED TOUGH® - so tough that we are offering a NO BREAK GUARANTEE. If you have our bits, we have your back.
PROJECTOR BULBS
