Armstrong® 52-115 Open End Regular Length Combination Wrench, 15 mm, 12 Points, 15 deg Offset, 7.52 in OAL, High Alloy Steel, Polished Chrome, ASME B107.9M-1994
Armstrong® 52-115 Open End Regular Length Combination Wrench, 15 mm, 12 Points, 15 deg Offset, 7.52 in OAL, High Alloy Steel, Polished Chrome, ASME B107.9M-1994
-
BrandArmstrong®
-
UPC781412521153
-
Manufacturer Part Number52-115
-
CountryUSA
-
Finish/CoatingPolished Chrome
-
MaterialHigh Alloy Steel
-
Measurement SystemMetric
-
TypeOpen End Regular Length
-
Head Angle15 deg
-
Wrench Opening15 mm
-
Number of Points12
-
Specifications MetASME B107.9M-1994
-
Offset Angle15 deg
-
Open End Thickness0.3 in
-
Open End Width1.24 in
-
Overall Length7.52 in
-
Box End Thickness0.38 in
-
Box End Width0.96 in
- Box ends incorporate a radius corner design that engages the flats of the fastener, not the corners, providing up to 15 to 20% more torque while reducing fastener rounding, enhancing the turning of worn fasteners
- Box ends are offset a true 15 deg for clearing obstructions and knuckle clearance on flat surfaces
- Open end has a radius design for greater strength; especially when compared to a hex open end
- Large size stamp on both sides of the wrench for ease in identification
- Full polish chrome finish provides smooth edges with a high luster
- Manufactured from high alloy steel using the most up-to-date manufacturing process and heat treat for greater strength and durability
| Competitor Name | Competitor Part Number |
|---|---|
| MSC | 00141895 |
-
UNSPSC27111713
-
Standards/ApprovalsASME B107.9M-1994
Recently Viewed
Armstrong® 52-115 Open End Regular Length Combination Wrench, 15 mm, 12 Points, 15 deg Offset, 7.52 in OAL, High Alloy Steel, Polished Chrome, ASME B107.9M-1994
Armstrong® 52-115 Open End Regular Length Combination Wrench, 15 mm, 12 Points, 15 deg Offset, 7.52 in OAL, High Alloy Steel, Polished Chrome, ASME B107.9M-1994
BBI 319300 Hex Nut, 1-1/4-7, Low Carbon Steel, Zinc CR+3, 2 Material Grade
MORSE® 31325 1266 Hex Rethreading Die, 1-1/8-12 UNF Thread, 1 in THK, Carbon Steel
Drillco 172F14010 1720 Imperial Masonry Drill, 5/8 in Drill Bit, SDS-Plus Shank, 8 in D Cutting, Carbide Cutting Edge, 10-1/4 in OAL
SDS Plus. 4x90 head geometry prevents locking when hitting rebar on the side. Bit is designed for longer life when drilling in concrete. As an additional benefit, it can crush through and pulverize rebar when drilling in reinforced concrete applications.
HEAVY-DUTY PULL-OUT TRUCK BED STORAGE KEEPS BED SPACE OPEN AND SUPPLIES ORGANIZED. THIS UNIT HAS 4 LOCKABLE COMPARTMENTS WITH 24 DIVIDERS. THE SLIDE OUT TRUCK BED TOOLBOX AND CARGO VAN TOOLBOX HAS A ROLL-OUT DRAWER LOAD RATING OF 425 POUNDS, EVENLY DISTRIBUTED.
-WTG3083 >
OIL SEALS-1.125" X 2.250" X .250"-IMS11378>

