Crescent® 20215 Combination Wrench, 13/16 in, 12 Points, 15 deg Offset, 10.58 in OAL, Drop Forged Alloy Steel, Polished Chrome/Nickel Plated
Crescent® 20215 Combination Wrench, 13/16 in, 12 Points, 15 deg Offset, 10.58 in OAL, Drop Forged Alloy Steel, Polished Chrome/Nickel Plated
-
BrandCrescent®
-
UPC082171202155
-
Manufacturer Part Number20215
-
CountryUSA
-
Finish/CoatingPolished Chrome/Nickel Plated
-
MaterialDrop Forged Alloy Steel
-
Measurement SystemImperial
-
Wrench Opening13/16 in
-
Number of Points12
-
Offset Angle15 deg
-
Open End Thickness0.37 in
-
Open End Width1.69 in
-
Overall Length10.58 in
-
Box End Thickness0.48 in
-
Box End Width1.18 in
- Drop forged and through hardened alloy is stronger, tougher and lasts longer
- Crescent® finish provides greater comfort and less chance for grip slippage
- 15 deg offset handle offers better knuckle clearance
- Crescent® box end for maximum torque with less chance of fastener head rounding
- Chamfered opening allows for faster and easier fit over fastener
- Nickel chrome finish provides lifetime corrosion resistance
-
UNSPSC27111713
-
Standards/ApprovalsANSI B107.6|Federal Specification GGG-W-636c
-
Catalog
Recently Viewed
Crescent® 20215 Combination Wrench, 13/16 in, 12 Points, 15 deg Offset, 10.58 in OAL, Drop Forged Alloy Steel, Polished Chrome/Nickel Plated
Crescent® 20215 Combination Wrench, 13/16 in, 12 Points, 15 deg Offset, 10.58 in OAL, Drop Forged Alloy Steel, Polished Chrome/Nickel Plated
24" OFFSET PIPE WRENCH-RIG89445>
Roller Chain - Standard Series, 40 / 1/2 in Pitch, Riveted, 1 Strand, Carbon Steel Material
AIR FILTERS-WIX46530>
Proto® TorquePlus™ J1232MASD Anti-Slip Design Combination Wrench, Metric, 32 mm, 12 Points, 15 deg Offset, 16 in OAL, Alloy Steel, Satin, ASME B107.100
Milwaukee® 48-20-5150 Heavy Duty Thick Wall Core Bit, 3-1/2 in Drill - Fraction, 3.5 in Drill - Decimal Inch, Carbide
Milwaukee's core bits are ideal for large hole drilling where depth is relatively shallow. The core bit cuts a Kerf only. The usable depth of thick wall core bits is 4-3/8 in.. the inside core must be removed by the operator before deeper drilling can be accomplished. The thick wall construction is ideal for larger hammers and more seasoned/cured concrete. A 7-1/2 in. extension is available to allow for the deeper holes to be drilled. The appropriate (Dependant on the diameter) Spline drive shank must be used to drive the core bit. Use 48-20-5199 center pin and 48-20-5173 guide plate for positioning and starting the hole. Thick wall core bits are available from 1 in. to 6 in. diameters. See thin wall core bits for less expensive drilling in new concrete and/or smaller hammers.
