Armstrong® 25-252 Long Length Open End Combination Wrench, 1-5/8 in, 12 Points, 15 deg Offset, 24-1/8 in OAL, High Alloy Steel, Satin Chrome, ASME B107.6-1994
Armstrong® 25-252 Long Length Open End Combination Wrench, 1-5/8 in, 12 Points, 15 deg Offset, 24-1/8 in OAL, High Alloy Steel, Satin Chrome, ASME B107.6-1994
-
BrandArmstrong®
-
UPC078141225252
-
Manufacturer Part Number25-252
-
CountryUSA
-
Finish/CoatingSatin Chrome
-
MaterialHigh Alloy Steel
-
Measurement SystemImperial
-
TypeLong Length Open End
-
Handle TypeFlat
-
Head Angle15 deg
-
Wrench Opening1-5/8 in
-
Number of Points12
-
Specifications MetASME B107.6-1994
-
Offset Angle15 deg
-
Open End Thickness0.64 in
-
Open End Width3-1/2 in
-
Overall Length24-1/8 in
-
Box End Thickness0.969 in
-
Box End Width2.437 in
- Box ends incorporate a radius corner design that engages the flats of the fastener, not the corners, providing up to 15 to 20% more torque while reducing fastener rounding, enhancing the turning of worn fasteners
- Box ends are offset a true 15 deg for clearing obstructions and knuckle clearance on flat surfaces
- The shank to box end transition area is also reinforced to provide greater strength
- Open end has a radius design for greater strength, especially when compared to a hex open end
- Large size stamp on both ends of the wrench and both sides of the wrench for ease in identification
- Satin chrome finish provides smooth edges with a bright appearance
- Manufactured from high alloy steel using the most up-to-date manufacturing process and heat treat for greater strength and durability
| Competitor Name | Competitor Part Number |
|---|---|
| MSC | 88565445 |
-
UNSPSC27111713
-
Standards/ApprovalsUS Federal Specification GGG-W-636E
-
Catalog
Recently Viewed
Armstrong® 25-252 Long Length Open End Combination Wrench, 1-5/8 in, 12 Points, 15 deg Offset, 24-1/8 in OAL, High Alloy Steel, Satin Chrome, ASME B107.6-1994
Armstrong® 25-252 Long Length Open End Combination Wrench, 1-5/8 in, 12 Points, 15 deg Offset, 24-1/8 in OAL, High Alloy Steel, Satin Chrome, ASME B107.6-1994
MORSE® 19069 1424S Silver & Deming Drill, 1-3/16 in Drill - Fraction, 1.1875 in Drill - Decimal Inch, 1/2 in Shank, HSS
Milwaukee® M12™ 48-20-7067 2-Cutter Rotary Hammer Drill Bit, 3/4 in Drill Bit, 25/64 in SDS Shank, 22 in D Cutting, Carbide Cutting Edge, 24 in OAL
Milwaukee® M/2™ 2-cutter SDS Plus rotary hammer drill bits are the most durable 2-cutter bits with up to 20% more holes per charge in cordless rotary hammers. The enhanced rebar guards provide increased durability in hard aggregate and rebar. Breaker point pulverize the material more effectively resulting in faster drilling speeds. The variable flute allows for maximum debris extraction leading to up 20% more holes per charge in cordless rotary hammer while making it a very durable bit in corded and cordless rotary hammers. Additionally, M/2™ 2-cutter features a centering tip for exact spot drilling, wear mark indicator indicating when the bit no longer meets ANSI diameter requirements, and a reinforced flute for durability and minimized vibration. The increased life and efficiency of the M/2™ 2-cutter drill bit line provides the ideal solution in general concrete for cordless and corded rotary hammer users.
Master Lock® 410RED Zenex™ 410 Lockout Padlock, Different Key, Red, Thermoplastic Body, 1/4 in Dia x 1-1/2 in H x 25/32 in W Steel Shackle, 1-3/4 in L Body
410 thermoplastic safety padlock. 1-1/2 in (3.8cm) wide 1-3/4 in (4.4cm) tall thermoplastic red body, shackle with 1-1/2 in (3.8cm) clearance. Designed exclusively for Lockout/Tagout applications. Durable, lightweight, non-conductive Thermoplastic lock body. Customize on-site with permanent, write-on labels. Compliance with OSHA inone employee, one lock, one key in directive. High security, reserved-for-safety cylinder. Key retaining-ensures that padlock is not left unlocked. Keyed different 6-pin tumbler cylinder. commercial boxed packaging, shelf pack quantity 6, master carton quantity 36.
OIL SEALS-NAT8660S>
COPPER TUBING CUTTERS-TABTC2 >
