Combination Wrenches
Proto® TorquePlus™ J1214MASD Anti-Slip Design Combination Wrench, Metric, 14 mm, 12 Points, 15 deg Offset, 8 in OAL, Alloy Steel, Satin, ASME B107.100, ANSI B107.9
Proto® TorquePlus™ J1214MES Combination Wrench, 14 mm Wrench, 12 Points, 15 deg Offset, 4-1/2 in OAL, Alloy Steel, Full Polished, ASME B107.100-2010
Proto® JSCVM14T Reversible Spline Combination Wrench, 14 mm, 12 Points, 15 deg Offset, 7-1/2 in OAL, Forged Steel, Full Polished, ASME Specified
Proto® TorquePlus™ J1215M Combination Wrench, 15 mm, 12 Points, 15 deg Offset, 9-5/32 in OAL, Alloy Steel, Full Polished, ASME B107.100
Proto® TorquePlus™ J1215MASD Anti-Slip Design Combination Wrench, Metric, 15 mm, 12 Points, 15 deg Offset, 9 in OAL, Alloy Steel, Satin, ASME B107.100, ANSI B107.9
Proto® TorquePlus™ J1215MES Combination Wrench, 15 mm Wrench, 12 Points, 15 deg Offset, 4-11/16 in OAL, Alloy Steel, Full Polished, ASME B107.100-2010
Proto® JSCVM15T Reversible Spline Combination Wrench, 15 mm, 12 Points, 15 deg Offset, 7-7/8 in OAL, Forged Steel, Full Polished, ASME Specified
Proto® TorquePlus™ J1230BASD Anti-Slip Design Combination Wrench, Imperial, 15/16 in, 12 Points, 15 deg Offset, 13-1/4 in OAL, Alloy Steel, Black Oxide, ASME B107.100
Proto® JSCV30T Reversible Spline Combination Wrench, 15/16 in, 12 Points, 15 deg Offset, 12-3/4 in OAL, Forged Steel, Full Polished, ASME Specified
Proto® TorquePlus™ J1230ASD Anti-Slip Design Combination Wrench, 15/16 in Wrench, 12 Points, 15 deg Offset, 13-1/4 in OAL, Alloy Steel, Satin, ASME B107.100
Proto® JSCR30T Non-Reversible Spline Combination Wrench, 15/16 in, 12 Points, 15 deg Offset, 12-3/4 in OAL, Forged Steel, Full Polished, ASME Specified
Proto® TorquePlus™ J1216M Combination Wrench, 16 mm, 12 Points, 15 deg Offset, 9-35/64 in OAL, Alloy Steel, Full Polished, ASME B107.100
Proto® JSCRM16T Non-Reversible Spline Combination Wrench, 16 mm, 12 Points, 15 deg Offset, 8-3/16 in OAL, Forged Steel, Full Polished, ASME Specified
Proto® TorquePlus™ J1216MASD Anti-Slip Design Combination Wrench, Metric, 16 mm, 12 Points, 15 deg Offset, 9 in OAL, Alloy Steel, Satin, ASME B107.100, ANSI B107.9
Proto® TorquePlus™ J1216MES Combination Wrench, 16 mm Wrench, 12 Points, 15 deg Offset, 4-7/8 in OAL, Alloy Steel, Full Polished, ASME B107.100-2010
Proto® JSCVM16T Reversible Spline Combination Wrench, 16 mm, 12 Points, 15 deg Offset, 8-3/16 in OAL, Forged Steel, Full Polished, ASME Specified
Proto® JSCVM17T Reversible Spline Combination Wrench, 17 mm, 12 Points, 15 deg Offset, 8-7/8 in OAL, Forged Steel, Full Polished, ASME Specified
Proto® TorquePlus™ J1217MASD Anti-Slip Design Combination Wrench, Metric, 17 mm, 12 Points, 15 deg Offset, 10 in OAL, Alloy Steel, Satin, ASME B107.100, ANSI B107.9
Proto® TorquePlus™ J1217MES Combination Wrench, 17 mm Wrench, 12 Points, 15 deg Offset, 5-1/16 in OAL, Alloy Steel, Full Polished, ASME B107.100-2010
Proto® TorquePlus™ J1218M Combination Wrench, 18 mm, 12 Points, 15 deg Offset, 10-11/16 in OAL, Alloy Steel, Full Polished, ASME B107.100
Proto® TorquePlus™ J1218MASD Anti-Slip Design Combination Wrench, Metric, 18 mm, 12 Points, 15 deg Offset, 10 in OAL, Alloy Steel, Satin, ASME B107.100
Proto® TorquePlus™ J1218MES Combination Wrench, 18 mm Wrench, 12 Points, 15 deg Offset, 5-1/4 in OAL, Alloy Steel, Full Polished, ASME B107.100-2010
Proto® JSCVM18T Reversible Spline Combination Wrench, 18 mm, 12 Points, 15 deg Offset, 9-5/16 in OAL, Forged Steel, Full Polished, ASME Specified
Proto® JSCVM19T Reversible Spline Combination Wrench, 19 mm, 12 Points, 15 deg Offset, 9-3/4 in OAL, Forged Steel, Full Polished, ASME Specified
Recently Viewed
6-TON SHOP JACK STANDS (PR)-JET441006 >
16-MM X 18-MM FLARE NUT WRENCH - ALL21516 >
Proto® TorquePlus™ J7330H Deep Length Socket, 1/2 in Square Drive, 15/16 in, 6 Points
Anvil® 0310089008 FIG 1125 Auxiliary Air Regulator Reducer, Coupling, 2 x 1-1/2 in Nominal, FNPT End Style, 150 lb, Malleable Iron, Black Oxide, Domestic
Anvil International offers the broadest line of malleable iron fitting sizes in both black and galvanized finishes. Every fitting is manufactured and tested to meet Anvil's strict quality standards. All Anvil Class 150 Malleable Iron Fittings conform to ASME B16.3 and unions conform to ASME B16.39. All elbows and tees 3/8 in (10 DN) and larger are 100% gas tested at a minimum of 100 PSI (6.9 bar).
S-FLEX COUPLING SLEEVES/INSERTS-TBW4JN>
3/8" -16" USS HEX RETHREAD DIE-DRI33E124C >
