GEARWRENCH® 86615 Low Profile Wrench, 15 mm Wrench, 12 Points, 15 deg Offset, 8.85 in OAL, Alloy Steel, Polished Chrome, ANSI/ASME Specified
GEARWRENCH 90-tooth reversible ratcheting wrench swing arc of just 4° turns fasteners in extremely tight spaces. Longer, wider beam delivers improved reach, leverage, and comfort. Large color-coded SAE/metric markings make size identification easy. All exceed ASME performance specs and come with the trusted GEARWRENCH Full Lifetime Warranty.
-
BrandGEARWRENCH®
-
UPC099575066153
-
Manufacturer Part Number86615
-
CountryUSA
-
Finish/CoatingPolished Chrome
-
MaterialAlloy Steel
-
Measurement SystemMetric
-
Head Angle15 deg
-
Box End Thickness0.39 in
-
Box End Width1.2 in
-
TypeLow Profile
-
Wrench Opening15 mm
-
Number of Geared Teeth90
-
Wrench TypeRatcheting
-
Number of Points12
-
Specifications MetANSI/ASME Specified
-
Offset Angle15 deg
-
Open End Thickness0.33 in
-
Open End Width1.33 in
-
Overall Length8.85 in
- Professional 90-tooth gear requires only 4 of swing arc to turn a fastener
- Low-profile reverse lever quickly switches from forward to reverse without removing the wrench
- 15 offset box end increases clearance and reduces injury potential
- Off-corner loading on both open and closed ends significantly reduces the risk of fastener rounding
- High visibility ink in size stamping for faster identification
- Bright, full polish chrome finish easily wipes clean and resists corrosion
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 386PY5 |
-
Package DescriptionEACH
-
Standards/ApprovalsASME and ANSI Specifications
-
WarrantyLimited Lifetime
Recently Viewed
GEARWRENCH® 86615 Low Profile Wrench, 15 mm Wrench, 12 Points, 15 deg Offset, 8.85 in OAL, Alloy Steel, Polished Chrome, ANSI/ASME Specified
GEARWRENCH 90-tooth reversible ratcheting wrench swing arc of just 4° turns fasteners in extremely tight spaces. Longer, wider beam delivers improved reach, leverage, and comfort. Large color-coded SAE/metric markings make size identification easy. All exceed ASME performance specs and come with the trusted GEARWRENCH Full Lifetime Warranty.
GENERAL® 482A Curved Swivel Deburring Blade, HSS Blade
1-1-1/16" 12-PT FULL POLISH LONG COMBINATION WRENCH-ARS25254 >
WORKBENCH TOP-PNC31145H028>
9" X 11" ULTRA FINE SANDPAPER--PACK OF 5-JWH357232 >
Square D™ B150 Type B Rainproof Hub, 1-1/2 in, For Use With QO™/Homeline™ NEMA 3R Load Center, Safety Switch and RB Devices
Industrial Circuit Breaker Enclosures are designed to be tough, reliable and provide exceptional performance in the most grueling conditions. Provides a dead front housing for circuit breakers, molded case switches, and motor circuit protectors to prevent personnel from accidentally contacting energized parts. Designed to meet or exceed UL 50 requirements for specific environmental conditions. Allow breaker operation without removing cover. These units are UL Listed and CSA Certified. Square D equipment with “R’’ or “RB’’ suffix, designated NEMA 3R rainproof construction, utilizes bolt-on hubs listed below. “RB’’ devices will accept 3/4 in. through 2- 1/2 in. bolt-on hubs without the use of reducers. Off-center conduit thread openings and elongated mounting holes provide quick and easy adjustment to eliminate costly conduit offsets and bends. Load Center Hub, 1.50 in, rainproof, for RB devices is a conduit entry, and is used for conduit installation. This bolt-on accessory has a UL listed rating. The dimensions are 1.38 mm(H)4.44 mm(W)3.09 mm(D). This product comes with an 18 month warranty.
