32-610 STANLEY TOOLS
TAPE MEASURE REFILL TAPES-STA32610>
Recently Viewed
TAPE MEASURE REFILL TAPES-STA32610>
24 TOOTH SPROCKETS FOR #40 CHAIN-BRWH4024X1 >
Drillco 700A118 Jobber Length Drill Bit, 9/32 in Drill - Fraction, 0.2812 in Drill - Decimal Inch, 118 deg Point, Solid Carbide, Uncoated
700 series solid carbide drills retain hardness and sharp edges at high temperature. Their abrasion-resistant qualities make them advantageous for drilling abrasive materials. They offer the advantage of extreme rigidity for greater drilling accuracy.
DeWALT® DW2220 Magnetic Nut Driver, 3/8 in Drive, Steel
Milwaukee® 48-20-4419 4-Cutter Rotary Hammer Drill Bit, 2 in Drill Bit, 3/4 in Spline Shank, 18 in D Cutting, Carbide Cutting Edge, 23 in OAL
Four cutter Spline bits have a series of 12 Spline that slide into an equal but opposite set of Spline in the drive system of the Spline drive hammer. This positive engagement of Spline to Spline allows maximum transmission of energy from the hammer to the bit. Superior quality Carbide nibs are vacuum brazed to a heat treated steel body resulting in four cutting edges which pulverize the concrete as the bit turns and pounds the work surface. Available from 5/8 in. to 1-1/2 in. diameters. 4 cutter style bits are also available in metric (from 16 mm to 38 mm). One per package.
DRILLCO 215N050A 2150N Spiral Point Tap, Right Hand Cutting, M5x0.8 Thread, D4 Thread Limit, Plug Chamfer, 3 Flutes, Oxide Treated, M35 HSS-Co
Nitro-Max ANSI/ANSI taps are produced with a reduced neck to allow for longer reach, improved coolant flow, and easier chip evacuation. These taps offer higher heat resistance and red hardness over conventional High Speed Steel taps. For CNC applications.
