Proto® TorquePlus™ J07530M Standard Length Socket, Metric, 3/4 in Square Drive, 30 mm
Proto® TorquePlus™ J07530M Standard Length Socket, Metric, 3/4 in Square Drive, 30 mm
-
BrandProto®
-
UPC662679360986
-
Manufacturer Part NumberJ07530M
-
CountryUSA|Canada
-
Locking TypeSide Locking Hole
-
FinishBlack Oxide
-
MaterialHigh Alloy Steel
-
Measurement SystemMetric
-
TypeStandard Length
-
Impact RatedYes
-
Number of Points6
-
Socket End Width47.6 mm
-
Socket Size30 mm
-
Opening Depth27.1 mm
-
Drive End Width44.4 mm
-
Drive Size3/4 in
-
Drive TypeSquare
-
Bolt Clearance Depth27.1 mm
-
Overall Length55.4 mm
- The TorquePlus™ design is a high performance drive configuration which allows for quick and easy socket engagement to the fastener flats, not the corners
- The TorquePlus™ configuration employs a radius corner design, shifting contact area and stress away from the fastener corners and distributing contact stresses over a large area of the socket, minimizing slippage
- The TorquePlus™ internal design minimizes fastener rounding, helps to extend fastener life and allows the user to more easily turn worn, rounded or rusted fasteners
- Stamped size for easy reference
- Specially heat treated for the correct balance of strength and durability
- Concentric openings
- Large clearance holes
- Tight nut end tolerances
- Made from high alloy steel for greater strength
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 1ACK4 |
| Grainger | 1ACK4 |
| Grainger | 1ACK4 |
-
UNSPSC27111704
-
Package DescriptionEACH
-
Standards/ApprovalsASME B107.33M
Recently Viewed
Proto® TorquePlus™ J07530M Standard Length Socket, Metric, 3/4 in Square Drive, 30 mm
Proto® TorquePlus™ J07530M Standard Length Socket, Metric, 3/4 in Square Drive, 30 mm
Proto® TorquePlus™ J4712M Standard Length Socket, Metric, 1/4 in Square Drive, 12 mm
Proto® TorquePlus™ J10068 Standard Length Socket, Imperial, 1 in Square Drive, 4-1/4 in
Proto® TorquePlus™ J10068 Standard Length Socket, Imperial, 1 in Square Drive, 4-1/4 in
Milwaukee® 48-20-5050 Heavy Duty Thin Wall Core Bit, 3-1/2 in Drill - Fraction, 3.5 in Drill - Decimal Inch, Carbide
Milwaukee's core bits are ideal for large hole drilling where depth is relatively shallow. The core bit cuts a Kerf only. The usable depth of thick wall core bits is 4-3/8 in.. the inside core must be removed by the operator before deeper drilling can be accomplished. The thick wall construction is ideal for larger hammers and more seasoned/cured concrete. A 7-1/2 in. extension is available to allow for the deeper holes to be drilled. The appropriate (Dependant on the diameter) SDS Plus drive shank must be used to drive the core bit. Use 48-20-6155 center pin and 48-20-6160 guide plate for positioning and starting the hole. Thin wall core bits are available from 1 in. to 6 in. diameters. See thick wall core bits for cured concrete and/or larger hammers.
Proto® TorquePlus™ J10058 Standard Length Socket, Imperial, 1 in Square Drive, 3-5/8 in
Proto® TorquePlus™ J10058 Standard Length Socket, Imperial, 1 in Square Drive, 3-5/8 in
Klein® Journeyman™ J2000-9NECRTP New England Nose Lineman's Plier, 1-19/32 in L x 1-1/4 in W x 5/8 in THK Jaw Tool Steel Jaw, 9-1/2 in OAL
Klein® specializes in the making of the world's finest pliers, pliers that professionals trust completely. Klein® pliers feel right and work right. They are job matched for every kind of work you do, designed and built to exceptional quality standards in a tradition that dates back to 1857.
