Proto® TorquePlus™ J07526M Standard Length Socket, Metric, 3/4 in Square Drive, 26 mm
Proto® TorquePlus™ J07526M Standard Length Socket, Metric, 3/4 in Square Drive, 26 mm
-
BrandProto®
-
UPC662679360856
-
Manufacturer Part NumberJ07526M
-
CountryUSA|Canada
-
Locking TypeSide Locking Hole
-
FinishBlack Oxide
-
MaterialAlloy Steel
-
Measurement SystemMetric
-
TypeStandard Length
-
Impact RatedYes
-
Number of Points6
-
Socket End Width41.3 mm
-
Socket Size26 mm
-
Opening Depth19.1 mm
-
Drive End Width41.3 mm
-
Drive Size3/4 in
-
Drive TypeSquare
-
Bolt Clearance Depth28.5 mm
-
Overall Length52.3 mm
- The TorquePlus™ design is a high performance drive configuration which allows for quick and easy socket engagement to the fastener flats, not the corners
- The TorquePlus™ configuration employs a radius corner design, shifting contact area and stress away from the fastener corners and distributing contact stresses over a large area of the socket, minimizing slippage
- The TorquePlus™ internal design minimizes fastener rounding, helps to extend fastener life and allows the user to more easily turn worn, rounded or rusted fasteners
- Stamped size for easy reference
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 1ACK1 |
| Grainger | 1ACK1 |
| Grainger | 1ACK1 |
-
UNSPSC27111704
-
Package DescriptionEACH
-
Standards/ApprovalsASME B107.33M
-
Catalog
Recently Viewed
Proto® TorquePlus™ J07526M Standard Length Socket, Metric, 3/4 in Square Drive, 26 mm
Proto® TorquePlus™ J07526M Standard Length Socket, Metric, 3/4 in Square Drive, 26 mm
Proto® J5420S Standard Length Socket, Imperial, 1/2 in Square Drive, 5/8 in
Milwaukee® 48-20-5040 Heavy Duty Thin Wall Core Bit, 2-1/2 in Drill - Fraction, 2.5 in Drill - Decimal Inch
Milwaukee's Carbide tipped core bits are ideal for drilling large holes where the depth is relatively shallow. The core bit cuts a Kerf only. The usable depth of thin wall core bits ranges from 2-13/16 in. to 3-3/16 in. The thin wall construction is ideal for smaller hammers and newer concrete. The inside core must be removed by the operator before deeper drilling can be accomplished. Multiple extensions and adapters are available to allow for deeper holes to be drilled. The appropriate drive shank must be used to drive the core bit. Use of center pin and guide plate is recommended for positioning and starting a 1-1/4 in. hole and larger. Use of center pin and guide plate is not recommended for positioning and starting a 1-1/8 in. hole or smaller. Milwaukee Carbide tipped core bits are available from 1 in. to 6 in. diff. Includes core bit centering pin and guide plate.
