Proto® TorquePlus™ J07517M Standard Length Socket, Metric, 3/4 in Square Drive, 17 mm
Proto® TorquePlus™ J07517M Standard Length Socket, Metric, 3/4 in Square Drive, 17 mm
-
BrandProto®
-
UPC662679360443
-
Manufacturer Part NumberJ07517M
-
CountryUSA|Canada
-
Locking TypeSide Locking Hole
-
FinishBlack Oxide
-
MaterialAlloy Steel
-
Measurement SystemMetric
-
TypeStandard Length
-
Impact RatedYes
-
Number of Points6
-
Socket End Width29.2 mm
-
Socket Size17 mm
-
Opening Depth10.9 mm
-
Drive End Width41.3 mm
-
Drive Size3/4 in
-
Drive TypeSquare
-
Bolt Clearance Depth25.2 mm
-
Overall Length49 mm
- The TorquePlus™ design is a high performance drive configuration which allows for quick and easy socket engagement to the fastener flats, not the corners
- The TorquePlus™ configuration employs a radius corner design, shifting contact area and stress away from the fastener corners and distributing contact stresses over a large area of the socket, minimizing slippage
- The TorquePlus™ internal design minimizes fastener rounding, helps to extend fastener life and allows the user to more easily turn worn, rounded or rusted fasteners
- Stamped size for easy reference
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 1ACH5 |
| Grainger | 1ACH5 |
| Grainger | 1ACH5 |
-
UNSPSC27111704
-
Package DescriptionEACH
-
Standards/ApprovalsASME B107.33M
-
Catalog
Recently Viewed
Proto® TorquePlus™ J07517M Standard Length Socket, Metric, 3/4 in Square Drive, 17 mm
Proto® TorquePlus™ J07517M Standard Length Socket, Metric, 3/4 in Square Drive, 17 mm
GP® 2016XD Extra-Deep Length Socket, 1/2 in, 1/2 in Hex Socket, 6 Points
GP® 2392D Thin Wall Socket, 1/2 in, 19 x 21 mm Hex Socket, 6 Points
11-MM 6-PT 1/2"-DR IMPACT SOCKET - ALL35111 >
RIDGID® 45260 Step Pin, For Use With: Model 300/300A Power Drive, Model 300 Compact/535-Manual Pipe and Bolt Threading Machine
RIDGID® 45260 Step Pin, For Use With: Model 300/300A Power Drive, Model 300 Compact/535-Manual Pipe and Bolt Threading Machine
The three-way pull chain socket can be used to replace a worn or broken socket or to build an entirely new light fixture. This socket pairs with a three-way bulb to offer three light levels. The pull chain switch is well suited to floor or table fixtures and its brass finish lends a classic look and effectively withstands heat. Thanks to its straight bracket design, installation is easy. UL listed and CSA approved for safety, it is rated for 250 W maximum and 250 V. The 2-1/4 in H socket has a tapped 1/8-IP bushing and uses medium base bulbs.
