Proto® J10014SS Standard Length Socket, Imperial, 1 in Square Drive, 7/8 in
Proto® J10014SS Standard Length Socket, Imperial, 1 in Square Drive, 7/8 in
-
BrandProto®
-
UPC662679370176
-
Manufacturer Part NumberJ10014SS
-
CountryUSA|Canada
-
Locking TypeSide Locking Hole
-
FinishBlack Oxide
-
MaterialAlloy Steel
-
Measurement SystemImperial
-
TypeStandard Length
-
Impact RatedYes
-
Number of Points4
-
Socket End Width2 in
-
Socket Size7/8 in
-
Opening Depth5/8 in
-
Drive End Width2-1/8 in
-
Drive Size1 in
-
Drive TypeSquare
-
Bolt Clearance Depth1-3/8 in
-
Overall Length2-1/2 in
- Drive end chamfer and four detents help provide quick positive engagement with drive tool on any of the socket drive walls
- Tight tolerances for snug fit on fastener
- Large clearance holes, concentric opening and nut end chamfer make it easy to position socket on fasteners
- Made from high strength steel to help minimize wall thickness and provide access to fasteners in recesses and where nuts and bolts protrude
- Impact sockets are used wherever powered drive tools are used to install or remove fasteners
- Impact sockets are designed to withstand higher torque and force associated with impact tools in repetitive application
- Features two through holes and a groove to accept a Proto® retaining ring or pin and O-ring to help secure the socket to the drive tool anvil
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 1AFP6 |
| Grainger | 1AFP6 |
| Grainger | 1AFP6 |
-
UNSPSC27111704
-
Package DescriptionEACH
-
Standards/ApprovalsASME B107.2
-
Catalog
Recently Viewed
Proto® J10014SS Standard Length Socket, Imperial, 1 in Square Drive, 7/8 in
Proto® J5420S Standard Length Socket, Imperial, 1/2 in Square Drive, 5/8 in
Milwaukee® 48-20-5040 Heavy Duty Thin Wall Core Bit, 2-1/2 in Drill - Fraction, 2.5 in Drill - Decimal Inch
Milwaukee's Carbide tipped core bits are ideal for drilling large holes where the depth is relatively shallow. The core bit cuts a Kerf only. The usable depth of thin wall core bits ranges from 2-13/16 in. to 3-3/16 in. The thin wall construction is ideal for smaller hammers and newer concrete. The inside core must be removed by the operator before deeper drilling can be accomplished. Multiple extensions and adapters are available to allow for deeper holes to be drilled. The appropriate drive shank must be used to drive the core bit. Use of center pin and guide plate is recommended for positioning and starting a 1-1/4 in. hole and larger. Use of center pin and guide plate is not recommended for positioning and starting a 1-1/8 in. hole or smaller. Milwaukee Carbide tipped core bits are available from 1 in. to 6 in. diff. Includes core bit centering pin and guide plate.
.047" CONV 90-DEG SNAP RING PLIERS-ARS68006>
Proto® TorquePlus™ J07521M Standard Length Socket, Metric, 3/4 in Square Drive, 21 mm
Proto® TorquePlus™ J07521M Standard Length Socket, Metric, 3/4 in Square Drive, 21 mm
REPLACEMENT HAMMER TIPS - ALL81602 >
