Proto Tools 3-5/8" 6-PT 1"-DR IMPACT SOCKET PRO J-10058
Proto® TorquePlus™ J10058 Standard Length Socket, Imperial, 1 in Square Drive, 3-5/8 in
-
BrandProto®
-
UPC662679371050
-
Manufacturer Part NumberJ10058
-
CountryUSA|Canada
-
Locking TypeSide Locking Hole
-
FinishBlack Oxide
-
MaterialAlloy Steel
-
Measurement SystemImperial
-
TypeStandard Length
-
Impact RatedYes
-
Number of Points6
-
Socket End Width4-7/8 in
-
Socket Size3-5/8 in
-
Opening Depth2-1/4 in
-
Drive End Width2-3/8 in
-
Drive Size1 in
-
Drive TypeSquare
-
Bolt Clearance Depth2-35/64 in
-
Overall Length4-3/4 in
- The TorquePlus™ design is a high performance drive configuration which allows for quick and easy socket engagement to the fastener flats, not the corners
- The TorquePlus™ configuration employs a radius corner design, shifting contact area and stress away from the fastener corners and distributing contact stresses over a large area of the socket, minimizing slippage
- The TorquePlus™ internal design minimizes fastener rounding, helps to extend fastener life and allows the user to more easily turn worn, rounded or rusted fasteners
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 1GG65 |
-
UNSPSC27111704
-
Package DescriptionEACH
-
Standards/ApprovalsASME B107.110-2012|ASME B107.2
-
Catalog
Recently Viewed
Proto® TorquePlus™ J10058 Standard Length Socket, Imperial, 1 in Square Drive, 3-5/8 in
Red Devil® 3169 Scraper Replacement Blade, High Carbon Steel, Four Edge Blade, Compatible With: 3170 Red Devil® Four Edge Wood Heavy Duty Scraper
Red Devil® 3169 Scraper Replacement Blade, High Carbon Steel, Four Edge Blade, Compatible With: 3170 Red Devil® Four Edge Wood Heavy Duty Scraper
Proto® TorquePlus™ J5424H Standard Length Socket, Imperial, 1/2 in Square Drive, 3/4 in
INTAKE CHECK VALVE-CACP07538A >
Proto Tools 1-1/2"-DR IMPACT UNIVERSAL JOINT PRO J-15670-A
Proto® J15670A Universal Standard Length Impact Joint, Black Oxide, 1-1/2 in Male Drive, 1-1/2 in Female Drive, Female x Male Adapter, Steel
Milwaukee® 48-20-5050 Heavy Duty Thin Wall Core Bit, 3-1/2 in Drill - Fraction, 3.5 in Drill - Decimal Inch, Carbide
Milwaukee's core bits are ideal for large hole drilling where depth is relatively shallow. The core bit cuts a Kerf only. The usable depth of thick wall core bits is 4-3/8 in.. the inside core must be removed by the operator before deeper drilling can be accomplished. The thick wall construction is ideal for larger hammers and more seasoned/cured concrete. A 7-1/2 in. extension is available to allow for the deeper holes to be drilled. The appropriate (Dependant on the diameter) SDS Plus drive shank must be used to drive the core bit. Use 48-20-6155 center pin and 48-20-6160 guide plate for positioning and starting the hole. Thin wall core bits are available from 1 in. to 6 in. diameters. See thick wall core bits for cured concrete and/or larger hammers.
