Proto Tools 7/16" 12-PT 1/2"-DR IMPACT SOCKETS PRO J-7414
Proto® TorquePlus™ J7414 Standard Length Socket, Imperial, 1/2 in Square Drive, 7/16 in
-
BrandProto®
-
UPC662679340933
-
Manufacturer Part NumberJ7414
-
CountryUSA|Canada
-
Locking TypeSide Locking Hole
-
FinishBlack Oxide
-
MaterialAlloy Steel
-
Measurement SystemImperial
-
TypeStandard Length
-
Impact RatedYes
-
Number of Points12
-
Socket End Width23/32 in
-
Socket Size7/16 in
-
Opening Depth13/32 in
-
Drive End Width15/16 in
-
Drive Size1/2 in
-
Drive TypeSquare
-
Bolt Clearance Depth27/32 in
-
Overall Length1-1/2 in
- The TorquePlus™ design is a high performance drive configuration which allows for quick and easy socket engagement to the fastener flats, not the corners
- The TorquePlus™ configuration employs a radius corner design, shifting contact area and stress away from the fastener corners and distributing contact stresses over a large area of the socket, minimizing slippage
- The TorquePlus™ internal design minimizes fastener rounding, helps to extend fastener life and allows the user to more easily turn worn, rounded or rusted fasteners
- Socket size stamped on tool for easy identification
| Competitor Name | Competitor Part Number |
|---|---|
| Berkshire eSupply | KP4206175 |
| Berkshire eSupply | KP4206175 |
-
UNSPSC27111704
-
Package DescriptionEACH
-
Standards/ApprovalsASME B107.110-2012|ASME B107.2|AS954E S3.8.1
-
Catalog
Recently Viewed
Proto® TorquePlus™ J7414 Standard Length Socket, Imperial, 1/2 in Square Drive, 7/16 in
1/2"DR X 10" SOCKET EXTENSIO - ALL12812B >
9/64" T-HANDLE HEX KEYS - ALL56050 >
The Crosby G-414 5/8" is a hot-dip galvanized, extra heavy-duty wire rope thimble designed to protect wire rope eyes from wear, crushing, and deformation. Manufactured by The Crosby Group, it is a non-load-bearing rigging component used to maintain the shape of a loop or eye in a wire rope assembly under tension.
Milwaukee® 49-57-0010 Arbor Assembly, #3 Shank, For Use With 4292-1 and 4297-1 Magnetic Drill Motor
Steel Hawg® arbor with No. 3 Morse taper shank for use in Milwaukee magnetic drill motors (models 4292-1 and 4297-1). This arbor adapts threaded Steel Hawg® cutters to a no. 3 internal Morse taper motor. For best cutting results use Hawg Wash® cutting fluid to keep cutting surface cool and lubricated. Hawg Wash® fluid is available in 16 oz bottles (49-32-0081). One bottle makes one gallon of lubricating solution. Order oil hose(43-75-0010) and hand pump (44-46-0090) separately to distribute cutting fluid during drilling.
Greenlee® Slug-Buster SC® 14722 SR Series Round Replacement Die, Round Punch, 1/2 in Conduit/Pipe, Mild Steel, 10 ga
Greenlee® Slug-Buster SC® 14722 SR Series Round Replacement Die, Round Punch, 1/2 in Conduit/Pipe, Mild Steel, 10 ga
