Proto® TorquePlus™ J5213M Standard Length Socket, Metric, 3/8 in Square Drive, 13 mm
Proto® TorquePlus™ J5213M Standard Length Socket, Metric, 3/8 in Square Drive, 13 mm
-
BrandProto®
-
UPC662679161392
-
Manufacturer Part NumberJ5213M
-
CountryUSA|Canada
-
Locking TypeBall
-
FinishFull Polished
-
MaterialAlloy Steel
-
Measurement SystemMetric
-
TypeStandard Length
-
Impact RatedNo
-
Number of Points12
-
Socket End Width18.7 mm
-
Socket Size13 mm
-
Opening Depth7 mm
-
Drive End Width18.7 mm
-
Drive Size3/8 in
-
Drive TypeSquare
-
Bolt Clearance Depth12.8 mm
-
Overall Length28.5 mm
- The TorquePlus™ design is a high performance drive configuration which allows for quick and easy socket engagement to the fastener flats, not the corners
- The TorquePlus™ configuration employs a radius corner design, shifting contact area and stress away from the fastener corners and distributing contact stresses over a large area of the socket, minimizing slippage
- The TorquePlus™ internal design minimizes fastener rounding, helps to extend fastener life and allows the user to more easily turn worn, rounded or rusted fasteners
- TorquePlus™ design allows more torque to be put on the fastener while reducing fastener rounding
| Competitor Name | Competitor Part Number |
|---|---|
| Berkshire eSupply | KP4202760 |
| Berkshire eSupply | KP4202760 |
-
UNSPSC27111704
-
Package DescriptionEACH
-
Standards/ApprovalsANSI B107.5|ASME B107.110-2012|ASME B107.5M|AS954E S3.8.1
Recently Viewed
Proto® TorquePlus™ J5213M Standard Length Socket, Metric, 3/8 in Square Drive, 13 mm
1-1/8" X 1/2" - DRIVE 6" PT. DEEP SOCKET-ARS12236 >
Proto® TorquePlus™ J5428B Standard Length Socket, Imperial, 1/2 in Square Drive, 7/8 in
Proto® TorquePlus™ J5428B Standard Length Socket, Imperial, 1/2 in Square Drive, 7/8 in
D-224-4-1/2-C KLEIN TOOLS Electronics End-Cutting pliers, 4-1/4" spring-loaded, self-opening, plastic dipped royal blue
4-5/8" END-CUTTING PLIERS-
Drillco 213A010CP 2103 Spiral Point Tap, Right Hand Cutting, Oversized #10-24 Thread, Plug Chamfer, 2 Flutes, Bright, HSS
Oversize taps are similar in design to a standard tap, but with a pitch diameter that is usually 0.0050” to 0.0055” larger than standard. Oversize taps are used primarily where a part will be plated or treated after tapping.
Proto® TorquePlus™ J5230 Standard Length Socket, Imperial, 3/8 in Square Drive, 15/16 in
Proto® TorquePlus™ J5230 Standard Length Socket, Imperial, 3/8 in Square Drive, 15/16 in
