Proto® TorquePlus™ J4712M Standard Length Socket, Metric, 1/4 in Square Drive, 12 mm
Proto® TorquePlus™ J4712M Standard Length Socket, Metric, 1/4 in Square Drive, 12 mm
-
BrandProto®
-
UPC662679140519
-
Manufacturer Part NumberJ4712M
-
CountryUSA|Canada
-
Locking TypeBall
-
FinishFull Polished
-
MaterialAlloy Steel
-
Measurement SystemMetric
-
TypeStandard Length
-
Impact RatedNo
-
Number of Points6
-
Socket End Width16.7 mm
-
Socket Size12 mm
-
Opening Depth9 mm
-
Drive End Width16.7 mm
-
Drive Size1/4 in
-
Drive TypeSquare
-
Bolt Clearance Depth13.7 mm
-
Overall Length22.2 mm
- The TorquePlus™ design is a high performance drive configuration which allows for quick and easy socket engagement to the fastener flats, not the corners
- The TorquePlus™ configuration employs a radius corner design, shifting contact area and stress away from the fastener corners and distributing contact stresses over a large area of the socket, minimizing slippage
- The TorquePlus™ internal design minimizes fastener rounding, helps to extend fastener life and allows the user to more easily turn worn, rounded or rusted fasteners
| Competitor Name | Competitor Part Number |
|---|---|
| Berkshire eSupply | KP4201830 |
| Berkshire eSupply | KP4201830 |
-
UNSPSC27111704
-
Package DescriptionEACH
-
Standards/ApprovalsASME B107.110-2012|ASME B107.5M
-
Catalog
Recently Viewed
Proto® TorquePlus™ J4712M Standard Length Socket, Metric, 1/4 in Square Drive, 12 mm
Milwaukee® 48-20-5050 Heavy Duty Thin Wall Core Bit, 3-1/2 in Drill - Fraction, 3.5 in Drill - Decimal Inch, Carbide
Milwaukee's core bits are ideal for large hole drilling where depth is relatively shallow. The core bit cuts a Kerf only. The usable depth of thick wall core bits is 4-3/8 in.. the inside core must be removed by the operator before deeper drilling can be accomplished. The thick wall construction is ideal for larger hammers and more seasoned/cured concrete. A 7-1/2 in. extension is available to allow for the deeper holes to be drilled. The appropriate (Dependant on the diameter) SDS Plus drive shank must be used to drive the core bit. Use 48-20-6155 center pin and 48-20-6160 guide plate for positioning and starting the hole. Thin wall core bits are available from 1 in. to 6 in. diameters. See thick wall core bits for cured concrete and/or larger hammers.
Proto® TorquePlus™ J07524M Standard Length Socket, Metric, 3/4 in Square Drive, 24 mm
Proto® TorquePlus™ J07524M Standard Length Socket, Metric, 3/4 in Square Drive, 24 mm
