Proto® J5420S Standard Length Socket, Imperial, 1/2 in Square Drive, 5/8 in
Proto® J5420S Standard Length Socket, Imperial, 1/2 in Square Drive, 5/8 in
-
BrandProto®
-
UPC662679180652
-
Manufacturer Part NumberJ5420S
-
CountryUSA|Canada
-
Locking TypeBall
-
FinishFull Polished
-
MaterialAlloy Steel
-
Measurement SystemImperial
-
TypeStandard Length
-
Impact RatedNo
-
Number of Points8
-
Socket End Width1-5/64 in
-
Socket Size5/8 in
-
Opening Depth37/64 in
-
Drive End Width1-5/64 in
-
Drive Size1/2 in
-
Drive TypeSquare
-
Bolt Clearance Depth1-3/32 in
-
Overall Length1-1/2 in
| Competitor Name | Competitor Part Number |
|---|---|
| Berkshire eSupply | KP4203735 |
| Berkshire eSupply | KP4203735 |
-
UNSPSC27111704
-
Package DescriptionEACH
-
Standards/ApprovalsASME B107.110-2012
-
Catalog
Recently Viewed
Proto® J5420S Standard Length Socket, Imperial, 1/2 in Square Drive, 5/8 in
Milwaukee® 48-20-5040 Heavy Duty Thin Wall Core Bit, 2-1/2 in Drill - Fraction, 2.5 in Drill - Decimal Inch
Milwaukee's Carbide tipped core bits are ideal for drilling large holes where the depth is relatively shallow. The core bit cuts a Kerf only. The usable depth of thin wall core bits ranges from 2-13/16 in. to 3-3/16 in. The thin wall construction is ideal for smaller hammers and newer concrete. The inside core must be removed by the operator before deeper drilling can be accomplished. Multiple extensions and adapters are available to allow for deeper holes to be drilled. The appropriate drive shank must be used to drive the core bit. Use of center pin and guide plate is recommended for positioning and starting a 1-1/4 in. hole and larger. Use of center pin and guide plate is not recommended for positioning and starting a 1-1/8 in. hole or smaller. Milwaukee Carbide tipped core bits are available from 1 in. to 6 in. diff. Includes core bit centering pin and guide plate.
.047" CONV 90-DEG SNAP RING PLIERS-ARS68006>
Proto® TorquePlus™ J07521M Standard Length Socket, Metric, 3/4 in Square Drive, 21 mm
Proto® TorquePlus™ J07521M Standard Length Socket, Metric, 3/4 in Square Drive, 21 mm
REPLACEMENT HAMMER TIPS - ALL81602 >
