Proto Tools 3/4" 6-PT 1/2"-DRIVE SOCKETS PRO J-5424-H
Proto® TorquePlus™ J5424H Standard Length Socket, Imperial, 1/2 in Square Drive, 3/4 in
-
BrandProto®
-
UPC662679180744
-
Manufacturer Part NumberJ5424H
-
CountryUSA|Canada
-
Locking TypeBall
-
FinishFull Polished
-
MaterialAlloy Steel
-
Measurement SystemImperial
-
TypeStandard Length
-
Impact RatedNo
-
Number of Points6
-
Socket End Width1-1/32 in
-
Socket Size3/4 in
-
Opening Depth11/16 in
-
Drive End Width1-1/32 in
-
Drive Size1/2 in
-
Drive TypeSquare
-
Bolt Clearance Depth21/32 in
-
Overall Length1-1/2 in
- The TorquePlus™ design is a high performance drive configuration which allows for quick and easy socket engagement to the fastener flats, not the corners
- The TorquePlus™ configuration employs a radius corner design, shifting contact area and stress away from the fastener corners and distributing contact stresses over a large area of the socket, minimizing slippage
- The TorquePlus™ design allows more torque to be put on the fastener while reducing fastener and allows the user to more easily turn worn, rounded or rusted fasteners
| Competitor Name | Cross-Reference Number |
|---|---|
| Berkshire eSupply | KP4203780 |
-
UNSPSC27111704
-
Package DescriptionEACH
-
Standards/ApprovalsANSI B107.1|ASME B107.110-2012|Federal Specification GGG-W-641E
Recently Viewed
Proto® TorquePlus™ J5424H Standard Length Socket, Imperial, 1/2 in Square Drive, 3/4 in
INTAKE CHECK VALVE-CACP07538A >
Proto Tools 1-1/2"-DR IMPACT UNIVERSAL JOINT PRO J-15670-A
Proto® J15670A Universal Standard Length Impact Joint, Black Oxide, 1-1/2 in Male Drive, 1-1/2 in Female Drive, Female x Male Adapter, Steel
Milwaukee® 48-20-5050 Heavy Duty Thin Wall Core Bit, 3-1/2 in Drill - Fraction, 3.5 in Drill - Decimal Inch, Carbide
Milwaukee's core bits are ideal for large hole drilling where depth is relatively shallow. The core bit cuts a Kerf only. The usable depth of thick wall core bits is 4-3/8 in.. the inside core must be removed by the operator before deeper drilling can be accomplished. The thick wall construction is ideal for larger hammers and more seasoned/cured concrete. A 7-1/2 in. extension is available to allow for the deeper holes to be drilled. The appropriate (Dependant on the diameter) SDS Plus drive shank must be used to drive the core bit. Use 48-20-6155 center pin and 48-20-6160 guide plate for positioning and starting the hole. Thin wall core bits are available from 1 in. to 6 in. diameters. See thick wall core bits for cured concrete and/or larger hammers.
2-1/4 AMP FUSES-LITFLA21/4>
#71 DRILLBIT-ITM207SP0071>
