Armstrong® 11-418 Standard Length Socket, 3/8 in Square Drive, 9/16 in, 8 Points
Armstrong® 11-418 Standard Length Socket, 3/8 in Square Drive, 9/16 in, 8 Points
-
BrandArmstrong®
-
UPC781412114188
-
Manufacturer Part Number11-418
-
CountryUSA
-
Locking TypeBall
-
FinishPolished Chrome
-
MaterialHigh Alloy Steel
-
Measurement SystemImperial
-
TypeStandard Length
-
Number of Points8
-
Socket End Width0.931 in
-
Socket Size9/16 in
-
Opening Depth0.8 in
-
Drive End Width0.931 in
-
Drive Size3/8 in
-
Drive TypeSquare
-
Bolt Clearance Depth0.57 in
-
Overall Length1-3/8 in
- EYE-D™ markings optimize size visibility, also providing SAE/metric differentiation
- Unique socket retention method, cold form ball recess, provides consistent secure retention of the socket to the drive tool eliminating the possibility of either a loose fit or tight fit
- Socket wall dimensions are optimized to provide strength while retaining access to restricted fasteners
- Manufactured from high alloy steel using the most up-to-date manufacturing process and heat treat for greater strength and durability
| Competitor Name | Competitor Part Number |
|---|---|
| MSC | 93603280 |
-
UNSPSC27111704
-
Standards/ApprovalsASME B107.1-2002|US Federal Specification GGG-W-641 E
Recently Viewed
Armstrong® 11-418 Standard Length Socket, 3/8 in Square Drive, 9/16 in, 8 Points
Milwaukee® 48-20-5030 Heavy Duty Thin Wall Core Bit, 1-3/4 in Drill - Fraction, 1.75 in Drill - Decimal Inch, Carbide
Milwaukee®'s SDS Plus thin wall core bits are used for drilling large through holes into brick, block, concrete. Includes core bit, guide plate, and centering pin.
PAIR OF SIZE-13" RUBBER KNEE BOOTS-BOO995452 >
Milwaukee® 48-20-5040 Heavy Duty Thin Wall Core Bit, 2-1/2 in Drill - Fraction, 2.5 in Drill - Decimal Inch
Milwaukee's Carbide tipped core bits are ideal for drilling large holes where the depth is relatively shallow. The core bit cuts a Kerf only. The usable depth of thin wall core bits ranges from 2-13/16 in. to 3-3/16 in. The thin wall construction is ideal for smaller hammers and newer concrete. The inside core must be removed by the operator before deeper drilling can be accomplished. Multiple extensions and adapters are available to allow for deeper holes to be drilled. The appropriate drive shank must be used to drive the core bit. Use of center pin and guide plate is recommended for positioning and starting a 1-1/4 in. hole and larger. Use of center pin and guide plate is not recommended for positioning and starting a 1-1/8 in. hole or smaller. Milwaukee Carbide tipped core bits are available from 1 in. to 6 in. diff. Includes core bit centering pin and guide plate.
TDT-52 Dodge® 245088, 2 TDT5 Twin-Tapered Bushing Assembly, 2 in ID, Ductile Iron
Dodge® 245088, 2 TDT5 Twin-Tapered Bushing Assembly, 2 in ID, Ductile Iron
7/16"-14 USS Nylock Jam Nuts
