Proto® TorquePlus™ J07520L Deep Length Socket, 3/4 in Square Drive, 1-1/4 in, 6 Points
Proto® TorquePlus™ J07520L Deep Length Socket, 3/4 in Square Drive, 1-1/4 in, 6 Points
-
BrandProto®
-
UPC662679360580
-
Manufacturer Part NumberJ07520L
-
CountryUSA|Canada
-
Locking TypeSide Locking Hole
-
FinishBlack Oxide
-
MaterialHigh Alloy Steel
-
Measurement SystemImperial
-
TypeDeep Length
-
Impact RatedYes
-
Number of Points6
-
Socket End Width2 in
-
Socket Size1-1/4 in
-
Opening Depth1 in
-
Drive End Width1-3/4 in
-
Drive Size3/4 in
-
Drive TypeSquare
-
Bolt Clearance Depth2-5/16 in
-
Overall Length3-1/4 in
- The TorquePlus™ design is a high performance drive configuration which allows for quick and easy socket engagement to the fastener flats, not the corners
- The TorquePlus™ configuration employs a radius corner design, shifting contact area and stress away from the fastener corners and distributing contact stresses over a large area of the socket, minimizing slippage
- The TorquePlus™ internal design minimizes fastener rounding, helps to extend fastener life and allows the user to more easily turn worn, rounded or rusted fasteners
- Stamped size for easy reference
- Specially heat treated for the correct balance of strength and durability
- Concentric openings
- Large clearance holes
- Tight nut end tolerances
- Made from high alloy steel for greater strength
| Competitor Name | Competitor Part Number |
|---|---|
| MSC | 85038545 |
| MSC | 85038545 |
| MSC | 85038545 |
-
UNSPSC27112828
-
Standards/ApprovalsANSI B107.2|ASME B107.2|Federal Spec GGG-W-660E
-
WarrantyLimited Lifetime
Recently Viewed
Proto® TorquePlus™ J07520L Deep Length Socket, 3/4 in Square Drive, 1-1/4 in, 6 Points
Proto® TorquePlus™ J07520L Deep Length Socket, 3/4 in Square Drive, 1-1/4 in, 6 Points
RIDGID® 38375 Bolt Threader Button Die, 7/8 in Conduit/Pipe, 7/8-9 UNC Thread, Right Thread, For Use With OO-RB Ratchet Bolt Threaders or 31B, 33B, 35B and 37B 3-Way Bolt Threaders, Alloy Steel
RIDGID® 38375 Bolt Threader Button Die, 7/8 in Conduit/Pipe, 7/8-9 UNC Thread, Right Thread, For Use With OO-RB Ratchet Bolt Threaders or 31B, 33B, 35B and 37B 3-Way Bolt Threaders, Alloy Steel
Drillco 215A132CP 2105 Spiral Point Tap, Right Hand Cutting, Oversized 1/2-13 Thread, Plug Chamfer, 3 Flutes, Bright, HSS
Oversize taps are similar in design to a standard tap, but with a pitch diameter that is usually 0.0050” to 0.0055” larger than standard. Oversize taps are used primarily where a part will be plated or treated after tapping.
Proto® TorquePlus™ J4708LT Deep Length Socket, Imperial, 1/4 in Square Drive, 1/4 in
GP® 4052D Deep Length Socket, 1 in, 1-5/8 in Hex Socket, 6 Points
Alemite® 386956 Coupling Suction Tube, For Use With 385003 and 385003-B1 Oil Mist Head
Alemite® 386956 Coupling Suction Tube, For Use With 385003 and 385003-B1 Oil Mist Head

