GP® 4066R Standard Length Socket, 1 in, 2-1/16 in Hex Socket, 6 Points
GP® 4066R Standard Length Socket, 1 in, 2-1/16 in Hex Socket, 6 Points
-
BrandGP®
-
Manufacturer Part Number4066R
-
CountryUSA
-
MaterialChrome Molybdenum Alloy Steel
-
Measurement SystemImperial
-
TypeStandard Length
-
Impact RatedYes
-
Number of Points6
-
Socket End Width2.95 in
-
Socket Size2-1/16 in
-
Socket TypeHex
-
Opening Depth1.38 in
-
Drive End Width2.28 in
-
Drive Size1 in
-
Bolt Clearance Depth1.57 in
-
Overall Length2.76 in
- Poly bag with barcode
Recently Viewed
GP® 4066R Standard Length Socket, 1 in, 2-1/16 in Hex Socket, 6 Points
Splitting Maul, 8 lb Head, Carbon Steel Head, Wood Handle, 34 in OAL
#2 1/4" SQUARE RECESS HEX POWER DRIVE, 1/8" X 1-15/16"-APX9542X >
Milwaukee® 48-20-5150 Heavy Duty Thick Wall Core Bit, 3-1/2 in Drill - Fraction, 3.5 in Drill - Decimal Inch, Carbide
Milwaukee's core bits are ideal for large hole drilling where depth is relatively shallow. The core bit cuts a Kerf only. The usable depth of thick wall core bits is 4-3/8 in.. the inside core must be removed by the operator before deeper drilling can be accomplished. The thick wall construction is ideal for larger hammers and more seasoned/cured concrete. A 7-1/2 in. extension is available to allow for the deeper holes to be drilled. The appropriate (Dependant on the diameter) Spline drive shank must be used to drive the core bit. Use 48-20-5199 center pin and 48-20-5173 guide plate for positioning and starting the hole. Thick wall core bits are available from 1 in. to 6 in. diameters. See thin wall core bits for less expensive drilling in new concrete and/or smaller hammers.
Gates® Power Transmission MegaCrimp™ 12G-12MPX G25 Straight Hydraulic Coupling, 3/4 in x 3/4-14 Nominal, Hose x MNPTF Swivel, Steel, Domestic
Gates® MegaCrimp™ couplings are designed for use with Gates® wire braid hydraulic hoses to create a robust, leak-free assembly. The pre-assembled coupling is designed with a patented "C" insert attached to the ferrule. This design ensures that crimping forces are evenly distributed to form a concentric, leak-free seal. One MegaCrimp™ coupling size can accommodate various one-and two-wire braid hydraulic hoses of different constructions and wall thicknesses, simplifying inventory requirements, helping to reduce costs and simplifying coupling selection.
GP® 4054R Standard Length Socket, 1 in, 1-11/16 in Hex Socket, 6 Points
