GP® 908RS Standard Length Socket, 1/4 in, 1/4 in Hex Socket, 6 Points
GP® 908RS Standard Length Socket, 1/4 in, 1/4 in Hex Socket, 6 Points
-
BrandGP®
-
Manufacturer Part Number908RS
-
CountryUSA
-
MaterialChrome Molybdenum Alloy Steel
-
Measurement SystemImperial
-
TypeStandard Length
-
Impact RatedYes
-
Number of Points6
-
Socket End Width0.41 in
-
Socket Size1/4 in
-
Socket TypeHex
-
Opening Depth0.28 in
-
Drive End Width0.51 in
-
Drive Size1/4 in
-
Bolt Clearance Depth0.55 in
-
Overall Length0.91 in
- Poly bag with barcode
Recently Viewed
GP® 908RS Standard Length Socket, 1/4 in, 1/4 in Hex Socket, 6 Points
1" -HOSEX16-MORFS 4W HYDRAULIC HOSE END-MHDN1616MF >
Type S NEMA motor starters are used for full voltage starting and stopping of AC squirrel cage motors. Type S motor starters have ratings up to 810 amperes. This 3 pole NEMA Size 0 non-reversing starter has an 18 ampere rating. NEMA Size 0 motor starters have 3 phase ratings of 3 HP at 200 and 230 VAC and 5 HP at 460 and 575 VAC. This non-reversing NEMA motor starter has a melting alloy type overload relay that uses Type B thermal units to sense over current conditions. This NEMA starter has a 5 kA maximum SCCR (Short Circuit Current Rating) per UL508A when protected by an appropriate circuit breaker or fuse. Type S motor starters are available with replaceable coils in a wide variety of voltages. This starter has a 440/480 VAC 50/60 Hz operating coil wired for common control. This NEMA starter is an open device without an enclosure. This starter is 6.77 inches tall, 4.52 inches wide and 4.22 inches deep. A wide variety of accessories are available for Type S starters. Type S non-reversing NEMA motor starters are UL listed and CSA certified.
11" X 5" X 5" GREEN SHELF BIN - AKR30230GRN>
GP® 4313S Standard Length Socket, 1 in, 13/16 in, 6 Points
1-1/4" -HOSEX#20 FLANGE CODE 61-MHDN2020FL >
