GP® 1030R Standard Length Socket, 3/8 in Drive, 15/16 in Socket, 6 Points
GP® 1030R Standard Length Socket, 3/8 in Drive, 15/16 in Socket, 6 Points
-
BrandGP®
-
UPC729440461652
-
Manufacturer Part Number1030R
-
CountryUSA
-
Measurement SystemSAE
-
TypeStandard Length
-
Impact RatedYes
-
Number of Points6
-
Socket End Width1.26 in
-
Socket Size15/16 in
-
Opening Depth0.51 in
-
Drive End Width1.26 in
-
Drive Size3/8 in
-
Bolt Clearance Depth0.69 in
-
Overall Length1.18 in
- 3/8 in Drive x 15/16 in Standard
- Poly bag with barcode
- 0.24 lbs Weight
-
WarrantyLimited Lifetime
Recently Viewed
GP® 1030R Standard Length Socket, 3/8 in Drive, 15/16 in Socket, 6 Points
Plastic End Cap For Use With 1-5/8 x 1-5/8 in B22, B24 Series Channel, PVC
Drillco 285A100A 2850 Spiral Point Tap, Right Hand Cutting, M10x1.5 Thread, D6 Thread Limit, Plug Chamfer, 3 Flutes, Uncoated, HSS
The angular flutes at the front end of these taps propel the chips ahead of the tap. This reduce loading and clogging in the flutes. Spiral Point taps are ideal for production tapping thru holes.
NICKEL COAT HOOKS--CARD OF 2-NTL192781 >
Browning® 1045491 VP Series Type 2 Variable Pitch Sheave, 7/8 in Finished Bore, 5.35 in OD, 1 Groove, 3.9 to 4.7 in (3L)/4.2 to 5.2 in (A/4L)/4.4 to 5.4 in (B/5L) Dia Pitch, 3/4 to 1-1/8 in W Face
The principle of a variable pitch sheave is that the threaded angular faced discs forming the V-shaped groove in which the belt rides are movable. VP sheaves consist of a male with a threaded barrel, and a female with a threaded bore. The male section with threaded barrel has flat surfaces at 180 deg increments that allow a flat surface for the setscrew to mate with. When the discs are moved toward each other, the belt rides higher in the groove and the pitch diameter of the sheave is larger which increases the driven speed. When the discs are moved away from each other, the belt rides lower and the pitch diameter is smaller decreasing the driven speed. The common term for this speed adjustment is called number of turns open from closed position.
MORSE® 33005 2047 General Purpose Standard Spiral Point Tap, Right Hand Cutting, 1/4-20 Thread, H3 Thread Limit, Plug Chamfer, 3 Flutes, Bright, HSS
