GP® 2136D Deep Length Socket, 1/2 in, 1-1/8 in, 12 Points
GP® 2136D Deep Length Socket, 1/2 in, 1-1/8 in, 12 Points
-
BrandGP®
-
Manufacturer Part Number2136D
-
CountryUSA
-
MaterialChrome Molybdenum Alloy Steel
-
Measurement SystemImperial
-
TypeDeep Length
-
Impact RatedYes
-
Number of Points12
-
Socket End Width1.57 in
-
Socket Size1-1/8 in
-
Opening Depth0.94 in
-
Drive End Width1.5 in
-
Drive Size1/2 in
-
Bolt Clearance Depth2.87 in
-
Overall Length3.54 in
- Poly bag with barcode
Recently Viewed
GP® 2136D Deep Length Socket, 1/2 in, 1-1/8 in, 12 Points
1-1/4" 6000-PSI HYDRAULIC HOSE (FT)-MHDCX20 >
V-BELTS-BRWA32>
Milwaukee® 48-20-5045 Heavy Duty Thin Wall Core Bit, 3 in Drill - Fraction, 3 in Drill - Decimal Inch
Milwaukee's core bits are ideal for large hole drilling where depth is relatively shallow. The core bit cuts a Kerf only. The usable depth of thick wall core bits is 4-3/8 in. The inside core must be removed by the operator before deeper drilling can be accomplished. The thick wall construction is ideal for larger hammers and more seasoned/cured concrete. A 7-1/2 in. extension is available to allow for the deeper holes to be drilled. The appropriate (Dependant on the diameter) SDS Plus drive shank must be used to drive the core bit. Use 48-20-6155 center pin and 48-20-6159 guide plate for positioning and starting the hole. Thin wall core bits are available from 1 in. to 6 in. diameters. See thick wall core bits for cured concrete and/or larger hammers.
7-MM 3/8"-DRIVE HEX DRIVER ELIMINATOR SOCKET - ARS38727>
V-BELTS-BRWB100>
