Proto Tools 3/4"-DRIVE SOCKET RETAINING RINGS PRO J-RR-07523
Proto® JRR07523 Crush Gauge Retaining Ring, 3/4 in Drive, For Use With Impact Socket, Resin/Steel, Red, Plastic Coated
-
BrandProto®
-
UPC662679978013
-
Manufacturer Part NumberJRR07523
-
CountryUSA|Canada
-
FinishPlastic Coated
-
MaterialResin/Steel
-
ColorRed
-
TypeCrush Gauge
-
Dimensions3/16 in H x 1-5/8 in W
-
Drive Size3/4 in
-
Overall Length1-5/8 in
-
Suitable For Use WithImpact Socket
- Retaining rings are used to help secure sockets onto drive tools
- They are not intended to bear any load
- The rotational forces are between the drive tool and the socket
- Designed with a resin crush gauge to help identify when to replace worn sockets
- The resin crush gauge on the pin helps indicate when a socket is excessively worn and should be replaced
- Drive tool and socket should line up when in use and should not pinch the crush gauge
- Cracked sockets and or worn drive tools cause each other to turn excessively in relation to each other
- This action pinches the small fin or the crush gauge on these retaining rings
- If the crush gauge is pinched, it is an indication that the socket and or the drive tool need to be replaced
- 1-piece construction, no loose parts
- Pin is made of resin which allows the material to compress without breaking
- Part numbers are embossed on the rings near the point at which the pin and ring meet
- 1-7/16 in groove
| Competitor Name | Cross-Reference Number |
|---|---|
| MSC | 04568150 |
-
UNSPSC27112832
-
WarrantyLimited Lifetime
Recently Viewed
Proto® JRR07523 Crush Gauge Retaining Ring, 3/4 in Drive, For Use With Impact Socket, Resin/Steel, Red, Plastic Coated
Loctite® 231926 262™ High Strength Medium Viscosity Permanent Threadlocker, 10 mL Bottle, Liquid Form, Red
FHP V-BELT (5-L-310) OUTSIDE CIRCUMFERENCE 31."-GAT3310 >
1/2" -ID JAW COUPLING HALVES-BRWL095X1/2 >
Milwaukee® MX4™ 48-20-7250 4-Cutter Rotary Hammer Drill Bit, 1-1/8 in Drill Bit, 25/64 in SDS Shank, 8 in D Cutting, Carbide Cutting Edge, 10 in OAL
The MILWAUKEE® SDS Plus 4-Cutter MX4™ 1-1/8" X 8" X 10" Drill Bits with solid head carbide deliver up to 5X longer life in concrete with rebar. Engineered with rebar guards to provide maximum durability in hard aggregate and rebar with a 4-cutter design that prevents lock-up, reducing downtime. The sharp centering tip offers exact spot drilling in concrete and metal decking. Variable flutes remove dust faster, reducing heat and delivering up to 20% more holes per battery charge. A wear mark indicator shows end of life and when bit no longer meets the ANSI requirement. The Milwaukee MX4™ 4-Cutter Drill Bits are ideal for concrete with rebar and masonry applications.
3/4" CYLINDER SHAPE CARBIDE BURRS-MCT59888>
