Hyde® 02420 Heavy Duty Chisel Scraper, Brass 1-Edge/Full Tang/Stiff Blade, 3-3/4 in L Blade, 3 in W Blade, Nylon Handle
Hyde® 02420 Heavy Duty Chisel Scraper, Brass 1-Edge/Full Tang/Stiff Blade, 3-3/4 in L Blade, 3 in W Blade, Nylon Handle
-
BrandHyde®
-
UPC794230242070
-
Manufacturer Part Number02420
-
CountryUSA
-
FinishMirror
-
ColorBlack/Silver
-
TypeHeavy Duty
-
Handle Length4 in
-
Handle MaterialNylon
-
Handle TypeTaper/Interlock
-
Blade Length3-3/4 in
-
Blade MaterialBrass
-
Blade Type1-Edge/Full Tang/Stiff
-
Blade Width3 in
- Scraper with non-spark brass blade for scraping delicate surfaces or working in volatile environment
- Full tang blade construction
- Nylon projection-interlock handle resists most common paint thinners and solvents
- Non-sparking, non-magnetic blade for use in hazardous environments
- Blades individually ground, mirror finished and clear coated
- 7-3/4 in Overall length
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 5LL98 |
| Grainger | 5LL98 |
-
UNSPSC27112009
-
Package Description10/PK
-
WarrantyLifetime
-
Catalog
Recently Viewed
Hyde® 02420 Heavy Duty Chisel Scraper, Brass 1-Edge/Full Tang/Stiff Blade, 3-3/4 in L Blade, 3 in W Blade, Nylon Handle
Hyde® 02420 Heavy Duty Chisel Scraper, Brass 1-Edge/Full Tang/Stiff Blade, 3-3/4 in L Blade, 3 in W Blade, Nylon Handle
13/16" COMBINATION GEARWRENCH-GRW9026>
Armstrong® 52-115 Open End Regular Length Combination Wrench, 15 mm, 12 Points, 15 deg Offset, 7.52 in OAL, High Alloy Steel, Polished Chrome, ASME B107.9M-1994
Armstrong® 52-115 Open End Regular Length Combination Wrench, 15 mm, 12 Points, 15 deg Offset, 7.52 in OAL, High Alloy Steel, Polished Chrome, ASME B107.9M-1994
Milwaukee® M12™ 2407-20 Compact Lightweight Cordless Drill/Driver, 3/8 in Chuck, 12 V DC, 0 to 400/0 to 1500 rpm No-Load, 7-3/8 in OAL, Li-Ion Battery
Drill and fasten up to 35% faster with the only tool in its class that has an all-metal locking chuck. The powerful M12TM cordless lithium-ion 3/8 in. drill/driver delivers 275 in-lbs of torque – up to 25% more torque than the competition – and 0-400/0 to 1,500 RPM. Its compact, lightweight and durable design means greater comfort and efficiency.
Milwaukee® 48-20-5160 Heavy Duty Thick Wall Core Bit, 5 in Drill - Fraction, 5 in Drill - Decimal Inch
Milwaukee's core bits are ideal for large hole drilling where depth is relatively shallow. The core bit cuts a Kerf only. The usable depth of thick wall core bits is 4-3/8 in. The inside core must be removed by the operator before deeper drilling can be accomplished. The thick wall construction is ideal for larger hammers and more seasoned/cured concrete. A 7-1/2 in. extension is available to allow for the deeper holes to be drilled. The appropriate (Dependant on the diameter) Spline drive shank must be used to drive the core bit. Use 48-20-5199 center pin and 48-20-5175 guide plate for positioning and starting the hole. Thick wall core bits are available from 1 in. to 6 in. diameters. See thin wall core bits for less expensive drilling in new concrete and/or smaller hammers.
D-259-4 TOOL REPLACEMENT SPRINGS-KLE575>
