Mayhew™ 21500 PRO™ Extra Long Pin Punch, 1/8 in Hex Punch, 7-7/8 in OAL, Alloy Steel
Mayhew™ 21500 PRO™ Extra Long Pin Punch, 1/8 in Hex Punch, 7-7/8 in OAL, Alloy Steel
-
BrandMayhew™
-
UPC045256215006
-
Manufacturer Part Number21500
-
CountryUSA
-
MaterialAlloy Steel
-
Punch Size1/8 in
-
Punch TypeHex
-
ColorBlack Oxide
-
TypeExtra Long
-
SeriesPRO™
-
Overall Length7-7/8 in
- Used to drive out and remove already loosened pins and keys after initial movement by a solid punch
- Not for use on seized pins and keys, loosen with a solid punch first
- Available in black oxide finish for additional rust protection
-
UNSPSC27111500
-
Package DescriptionEACH
-
Catalog
Recently Viewed
Mayhew™ 21500 PRO™ Extra Long Pin Punch, 1/8 in Hex Punch, 7-7/8 in OAL, Alloy Steel
Mayhew™ 21500 PRO™ Extra Long Pin Punch, 1/8 in Hex Punch, 7-7/8 in OAL, Alloy Steel
MORSE® 32309 2046 General Purpose Straight Flute Hand Tap, Right Hand Cutting, 7/16-14 Thread, H3 Thread Limit, Tapered Chamfer, 4 Flutes, Bright, HSS
MORSE® 32309 2046 General Purpose Straight Flute Hand Tap, Right Hand Cutting, 7/16-14 Thread, H3 Thread Limit, Tapered Chamfer, 4 Flutes, Bright, HSS
Drillco 31E100CB 3100E Adjustable Round Split Die, M10x1.25 Thread, 1 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder. Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Milwaukee® 49-59-2106 Annular Cutter, 1-1/16 in Dia Cutter, 2 in D Cutting, HSS, Oxide Treated, Weldon Shank
Milwaukee high speed steel annular cutters offer a thin-wall construction with an advanced tooth geometry that cuts and cleans while drilling, leading to faster holes and longer life. The cutters displace less material for the same size hole as the competition, giving you fast, burr-free holes in anything from sheet metal to thick plate steel. All Milwaukee high speed steel annular cutters have a 3/4 in. Weldon shank for use with most small magnetic drill presses and large magnetic drill presses with the correct arbor.
The round split adjustable die may be adjusted through the screws on the holder. Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
HCI Preferred Supplier 80206 Pressure Gauge, 0 to 200 psi Pressure, 1/4 in Connection, 2-1/2 in Dia Dial, +/-1.5 % Accuracy
HCI Preferred Supplier 80206 Pressure Gauge, 0 to 200 psi Pressure, 1/4 in Connection, 2-1/2 in Dia Dial, +/-1.5 % Accuracy
