Hole Punches
Proto® J967/16S2 1-Piece Drift Punch, 7/32 in Parabolic Punch, 10 in OAL, Steel
Proto® J967/16S2 1-Piece Drift Punch, 7/32 in Parabolic Punch, 10 in OAL, Steel
Proto® J965/8S2 1-Piece Drift Punch, 5/16 in, 10 in OAL, Steel
Proto® J965/8 1-Piece Drift Punch, 5/8 in Parabolic, 10 in OAL, Steel
Proto® J965/16S2 1-Piece Drift Punch, 1/8 in Parabolic Punch, 10 in OAL, Steel
Proto® J9638B Drift Punch, 3/8 in, 6 in OAL, Brass
Proto® J963/8S2 1-Piece Drift Punch, 3/16 in Parabolic Punch, 10 in OAL, Steel
Proto® J963/8 1-Piece Drift Punch, 3/16 in Parabolic, 10-1/8 in OAL, Steel
Proto® J963/4S2 1-Piece Drift Punch, 3/8 in Parabolic Punch, 10 in OAL, Steel
Proto® J9612B Drift Punch, 1/2 in Parabolic Punch, 7 in OAL, Brass
Proto® J961/4S2 1-Piece Drift Punch, 3/32 in Parabolic Punch, 10 in OAL, Steel
Proto® J961/2S2 1-Piece Drift Punch, 1/4 in Parabolic Punch, 10 in OAL, Steel
Proto® J507/16S2 1-Piece Starting Punch, 7/32 in Parabolic Punch, 6 in OAL, Steel
Proto® J507/16S2 1-Piece Starting Punch, 7/32 in Parabolic Punch, 6 in OAL, Steel
Proto® J505/16S2 1-Piece Starting Punch, 1/8 in Parabolic Punch, 5-1/8 in OAL, Steel
Proto® J505/16S2 1-Piece Starting Punch, 1/8 in Parabolic Punch, 5-1/8 in OAL, Steel
Proto® J503/8S2 1-Piece Starting Punch, 3/16 in Parabolic Punch, 5-5/8 in OAL, Steel
Proto® J503/8S2 1-Piece Starting Punch, 3/16 in Parabolic Punch, 5-5/8 in OAL, Steel
Proto® J503/16S2 1-Piece Starting Punch, 1/16 in Parabolic Punch, 4-1/8 in OAL, Steel
Proto® J503/16S2 1-Piece Starting Punch, 1/16 in Parabolic Punch, 4-1/8 in OAL, Steel
Proto® J501/4S2 1-Piece Starting Punch, 3/32 in Parabolic, 5 in OAL, Steel
Proto® J501/2S2 1-Piece Starting Punch, 1/4 in Parabolic, 6-1/2 in OAL, Steel
Proto® J49920 Drift Punch, 1/2 in Parabolic, 7-7/8 in OAL, Brass
Proto® J49732S2 1-Piece Roll Pin Punch, 7/32 in Parabolic Punch, 5-7/8 in OAL, Steel
Proto® J49732S2 1-Piece Roll Pin Punch, 7/32 in Parabolic Punch, 5-7/8 in OAL, Steel
Proto® J49532S2 1-Piece Roll Pin Punch, 5/32 in Parabolic Punch, 5-1/4 in OAL, Steel
Proto® J49532S2 1-Piece Roll Pin Punch, 5/32 in Parabolic Punch, 5-1/4 in OAL, Steel
Proto® J49332S2 1-Piece Roll Pin Punch, 3/32 in Parabolic Punch, 4-1/4 in OAL, Steel
Proto® J49332S2 1-Piece Roll Pin Punch, 3/32 in Parabolic Punch, 4-1/4 in OAL, Steel
Proto® J49316S2 1-Piece Roll Pin Punch, 3/16 in Parabolic Punch, 5-7/16 in OAL, Steel
Proto® J49316S2 1-Piece Roll Pin Punch, 3/16 in Parabolic Punch, 5-7/16 in OAL, Steel
Proto® J49116S2 1-Piece Roll Pin Punch, 1/16 in Parabolic Punch, 3-3/4 in OAL, Steel
Proto® J49116S2 1-Piece Roll Pin Punch, 1/16 in Parabolic Punch, 3-3/4 in OAL, Steel
Proto® J49038S2 1-Piece Roll Pin Punch, 3/8 in Parabolic, 7-1/2 in OAL, Steel
Recently Viewed
D-HANDLED SQUARE POINT SHOVELS-AME13428>
ROOFING SPADES WITH TEETH-AME15652>
F/G HANDLED ROUND POINT SHOVELS-AME15614>
HSP SHOVEL WITH F/G HANDLE-AME15846>
14" X .125 METAL CUTTING BLADE-DIM68000 >
Koyo TRC-2233 Double Direction Thrust Washer, 34.93 mm ID x 52.37 mm OD, 2.41 mm W
Ideally, a thrust washer should be stationary with respect to and piloted by its supporting or backing member whether or not this is an integral part of the shaft or housing. There should be no rubbing action between the thrust washer and any other machine member. The economics of design, however, often preclude these ideal conditions and thrust washers must be employed in another manner. In such cases, design details should be determined in consultation with your representative.
