Crescent® CPCCHS12 Punch and Chisel Set, 12 Pieces
New Crescent Cold Chisels, Wood Chisels, Nail Punches and Pin Punches are designed to deliver the best in durability, safety, and ease-of-use, with extra-large strike caps that are hardened to prevent mushrooming. Shanks of wood chisels and nail punches have a full metal core for extra durability, while cold chisels feature a recessed “control panel” and longer shanks for extra comfort, safety, and access.
-
BrandCrescent®
-
UPC037103360823
-
Manufacturer Part NumberCPCCHS12
-
CountryUSA
-
FinishLacquer
-
MaterialCarbon Steel
-
Number of Pieces12
-
Overall Length7.5 in
- Extended length keeps tool holding hand away from obstructions and debris
- Striking cap design reduces mushrooming and keeps users hands away from contact
- Recessed stock provides better control while using the tool
- High-viz coloring and bold size markings to make quick and easy identification while on the job
- Forged and heat treated steel for durability and long tool life
-
Package DescriptionEACH
-
Standards/ApprovalsASME B107.410-2018|PROP65: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, birth defects or other reproductive harm
-
WarrantyLimited Lifetime
Recently Viewed
New Crescent Cold Chisels, Wood Chisels, Nail Punches and Pin Punches are designed to deliver the best in durability, safety, and ease-of-use, with extra-large strike caps that are hardened to prevent mushrooming. Shanks of wood chisels and nail punches have a full metal core for extra durability, while cold chisels feature a recessed “control panel” and longer shanks for extra comfort, safety, and access.
PTI 10B-31B Single Strand Hub Type B Roller Chain Sprocket, 20 mm Dia Bore, 163.9 mm OD, #10B-1 Chain, 31 Teeth, 15.875 mm Pitch, C45 Steel
Hub type metric sprockets are available with a minimum plain bore (pilot bore) and some stock finished bore sizes. Any shaft size is possible with our custom bore and keyway capability. Sprockets with hubs are typically fitted to the shaft as a clearance fit. They are held in place with two set screws and a keyway. Clearance fits are popular for light loads and slow speeds. A press fit (or shrink fit to the shaft) is usually preferred for higher speeds or heavier loads as they fit to the shaft more securely than a clearance fit sprocket. Depending on the clearance of the shaft fit, sprockets may work slightly on the shaft causing possible fretting or shaft wear. All sprockets are available with hardened teeth from stock or on request. Press fits usually require the sprocket to be heated for installation to expand the bore. As a heated sprocket cools, it shrinks, conforming to the shaft with a tight grip. A set screw can be used to secure the key. The TL taper bushed sprocket will function like the press fit sprocket and is generally easier to install.
Milwaukee® M12™ 2355-20 Flashlight With Fixed Pocket, LED Bulb, Aluminum Housing, 325 to 800 Lumens
The M12™ LED metal flash light establishes a new benchmark for 12 V flashlights, bringing new levels of versatility, performance and durability to the industry. Its powerful LED produces 800 Lumens of high definition light output and it can cast a beam beyond 375 yards. The 2355-20's sliding head allows users to adjust their beam pattern from a flood to a spot effortlessly and it features three output modes for high, low or strobe use. The body is built from machined 6000 Series Aluminum with a type II anodized finish and can handle anything it may encounter through years of professional use.
GEARWRENCH® 88150 81 Series Premium Air Impact Wrench, 1/2 in Drive, 50 to 800 ft-lb Torque, 40.5 scfm Air Flow, 7.3 in OAL, Tool Only
GEARWRENCH® 88150 81 Series Premium Air Impact Wrench, 1/2 in Drive, 50 to 800 ft-lb Torque, 40.5 scfm Air Flow, 7.3 in OAL, Tool Only
9-PIECE HEX BIT SET - JWH397326 >
Apex® EX-375 Extension Socket Adapter, Square Drive, 3/8 in Male Drive, 1/2 in Female Drive, Female x Male Adapter, ASME B107.113, High Carbon Alloy Steel
Apex® EX-375 Extension Socket Adapter, Square Drive, 3/8 in Male Drive, 1/2 in Female Drive, Female x Male Adapter, ASME B107.113, High Carbon Alloy Steel
