PRECISION 26010--.005" SHIMS ARE PRECISION DIE CUT FROM 1095 BLUE TEMPERED SPRING STEEL. 0.015" AND 0.032" SHIMS ARE DIE CUT FROM 1075 TEMPERED SPRING STEEL. FITS SIX DIFFERENT SHOULDER SCREW SIZES FROM 1/4" TO 3/4" DIAMETER
SHORTENING SHIMS ARE PRECISION DIE CUT TO FIT WITH CLOSE TOLERANCES AROUND THE SHOULDER SCREW SHANK TO FIT UNDER THE SCREW HEAD. IT CONTAINS 3 THICKNESSES; 0.005" FROM 1095 BLUE TEMPERED SPRING STEEL AND 0.015" AND 0.032" FROM 1075 TEMPERED SPRING STEEL. IT FITS SIX DIFFERENT SHOULDER SCREW SIZES FROM 1/4" TO 3/4" DIAMETER.
-PRC26010 >
Recently Viewed
SHORTENING SHIMS ARE PRECISION DIE CUT TO FIT WITH CLOSE TOLERANCES AROUND THE SHOULDER SCREW SHANK TO FIT UNDER THE SCREW HEAD. IT CONTAINS 3 THICKNESSES; 0.005" FROM 1095 BLUE TEMPERED SPRING STEEL AND 0.015" AND 0.032" FROM 1075 TEMPERED SPRING STEEL. IT FITS SIX DIFFERENT SHOULDER SCREW SIZES FROM 1/4" TO 3/4" DIAMETER.
-PRC26010 >
Milwaukee® M12™ 48-20-7457 2-Cutter Rotary Hammer Drill Bit, 3/8 in Drill Bit, 25/64 in SDS-Plus Shank, 16 in D Cutting, Carbide Cutting Edge, 18 in OAL
Milwaukee® M/2™ 2-cutter SDS Plus rotary hammer drill bits are the most durable 2-cutter bits with up to 20% more holes per charge in cordless rotary hammers. The enhanced rebar guards provide increased durability in hard aggregate and rebar. Breaker point pulverize the material more effectively resulting in faster drilling speeds. The variable flute allows for maximum debris extraction leading to up 20% more holes per charge in cordless rotary hammer while making it a very durable bit in corded and cordless rotary hammers. Additionally, M/2™ 2-cutter features a centering tip for exact spot drilling, wear mark indicator indicating when the bit no longer meets ANSI diameter requirements, and a reinforced flute for durability and minimized vibration. The increased life and efficiency of the M/2™ 2-cutter drill bit line provides the ideal solution in general concrete for cordless and corded rotary hammer users.
GEARWRENCH® 81653 Long Length Open End Combination Wrench, 11/32 in Wrench, 12 Points, 15 deg Offset, 6.22 in OAL, Premium Alloy Steel, Polished Chrome
The GEARWRENCH combination wrenches are durable tools for most jobs. They are made from alloy steel with either a full polish or satin finish that resists rust & corrosion. The off-corner loading design on both ends provides a stronger grip on fasteners, reduces fastener rounding, and delivers up to 25% more torque to the fasteners. Sizes are stamped on the beam for quick, easy, & permanent identification. The box end is offset 15° for increased access to fasteners. Available in stubby & long pattern lengths and 6 & 12 point, the GEARWRENCH combination wrenches are a must have for every toolbox.
Irwin® 326024 Percussion Rotary Hammer Drill Bit, 7/8 in Drill Bit, 1/2 in Straight Shank, 3 in D Cutting, Carbide Cutting Edge, 6 in OAL
Built to withstand demanding materials, the 7/8 in. x 3 in. x 6 in. Rotary Percussion Drill Bit is made of copper braze material for high heat resistance. The chrome-vanadium spring steel shaft adds durability for extended bit lifetime and the double-ground, extra-deep flute removes debris fast for increased visibility. This bit works in hammer drills with a 3-jaw or Jacobs chuck.
Milwaukee® 48-25-5220 7-Piece Blade Replacement Kit, For Use With SwitchBlade™ 1-3/8 in Self-Feed Drill Bit
Keep all the tools to change your SWITCHBLADE™ in this handy, self-contained storage case. The SWITCHBLADE™ replacement kit includes three replacement blades, one feed screw, two set screws, and an integrated hex wrench. 1-3/8 in. SWITCHBLADE™ 3 blade replacement kit come with: (3) 1-3/8 in. SWITCHBLADE™ Selfeed bit blades, (1) feed screw, (2) set screws, built in hex wrench with storage case.
Irwin® 326019 Percussion Rotary Hammer Drill Bit, 5/8 in Drill Bit, 1/2 in Straight Shank, 3 in D Cutting, Carbide Cutting Edge, 6 in OAL
Power through demanding drilling jobs with the 5/8 in. x 3 in. x 6 in. Rotary Percussion Drill Bit, made from copper braze material for higher heat resistance. With a chrome-vanadium spring steel shaft, this bit has increased durability and a longer bit life. The double-ground, extra-deep flute increases speed and this bit works in hammer drills with a 3-jaw or Jacobs chuck.
