Pipe & Tubing Cutters
For use in extremely tight places, mini tubing cutters require minimal swing around the tubing. Mini tubing cutters can be used on copper, steel, stainless steel and aluminum tubing. MC2GRIP has rounded corners and edges of the body for a more comfortable grip when rotating the cutter around tubing. After tightening the feed screw, mini tubing cutters work faster by providing a more consistent cutting force on the wheel.
RIDGID® 23498 Ratcheting Tubing Cutter, 1/8 to 1-5/8 in Nominal, Ergonomic Grip Handle
RIDGID® 23498 Ratcheting Tubing Cutter, 1/8 to 1-5/8 in Nominal, Ergonomic Grip Handle
RIDGID® 30088, RC-2375 Ratchet Action Pipe and Tubing Cutter, 1/8 to 2-3/8 in, Ergonomic Grip Handle
The New Model RC-2375 Large Diameter Ratcheting Plastic Pipe and Tubing Cutter expands RIDGID® product offering for plastic pipe specific tools. The advanced blade design combined with the ratcheting mechanism, work together to reduce the amount of hand force needed to cut through hard plastic material. A quick-change blade pin enables the user to change blades in a matter of seconds without tools, saving valuable time and increasing productivity. This pin also assures that there will be no lost clips or misplaced screws during a blade change. With a 23 /8 in (63 mm) O.D. capacity, the RC-2375 easily cuts plastic pipe and tubing such as PVC and CPVC, as well as PEX, polyethylene, polybutylene and rubber hose.
RIDGID® 31622 150 Constant Swing Tube Cutter, 1/8 to 1-1/8 in, Ergonomic Handle
Models 150 and 150-L still provide best-in-class cutting accuracy and cutter wheel life, a constant swing radius design that makes them useful in tight space applications and an enclosed feed screw to prevent clogging or jamming. In addition, a spare cutter wheel is still included in the knob for maximum uptime, and a fold-away reamer is stored in the frame for proper tube preparation.
RIDGID® 31632 Quick Acting Tubing Cutter, 1/4 to 1-5/8 in Nominal, Ergonomic Grip Handle
RIDGID® 31632 Quick Acting Tubing Cutter, 1/4 to 1-5/8 in Nominal, Ergonomic Grip Handle
RIDGID® 31637, 151-P Quick-Acting Tubing Cutter With E-2155 Wheel, 1/8 to 1-1/4 in, Ergonomic Grip Handle
RIDGID® 31637, 151-P Quick-Acting Tubing Cutter With E-2155 Wheel, 1/8 to 1-1/4 in, Ergonomic Handle
RIDGID® 31642 Quick Acting Tubing Cutter, 1/4 to 2-5/8 in Nominal, Ergonomic Grip Handle
RIDGID® 31642 Quick Acting Tubing Cutter, 1/4 to 2-5/8 in Nominal, Ergonomic Grip Handle
RIDGID® 31647, 152-P Quick-Acting Tubing Cutter With E-2155 Wheel, 1/4 to 2 in, Ergonomic Grip Handle
RIDGID® 31647, 152-P Quick-Acting Tubing Cutter With E-2155 Wheel, 1/4 to 2 in, Ergonomic Handle
RIDGID® 31657, 154-P Quick-Acting Tubing Cutter With E-2156 Wheel, 1-1/2 to 4 in, Ergonomic Grip Handle
RIDGID® 31657, 154-P Quick-Acting Tubing Cutter With E-2156 Wheel, 1-1/2 to 4 in, Ergonomic Handle
RIDGID® 31662, 156 Quick-Acting Tubing Cutter, 4 to 6-5/8 in, Ergonomic Grip Handle
RIDGID® 31662, 156 Quick-Acting Tubing Cutter, 4 to 6-5/8 in, Ergonomic Handle
RIDGID® 32820 Heavy Duty Pipe Cutter, 1/8 to 2 in Nominal, Ergonomic Grip Handle
RIDGID® 32820 Heavy Duty Pipe Cutter, 1/8 to 2 in Nominal, Ergonomic Grip Handle
RIDGID® 32830, 3-S Heavy Duty Pipe Cutter, 1 to 3 in, Ergonomic Grip Handle
RIDGID® 32830, 3-S Heavy Duty Pipe Cutter, 1 to 3 in, Ergonomic Handle
RIDGID® 32840, 4-S Heavy Duty Pipe Cutter, 2 to 4 in, Ergonomic Grip Handle
RIDGID® 32840, 4-S Heavy Duty Pipe Cutter, 2 to 4 in, Ergonomic Handle
RIDGID® 32850, 6-S Heavy Duty Pipe Cutter, 4 to 6 in
RIDGID® 32870 42-A 4-Wheel Heavy Duty Pipe Cutter, 3/4 to 2 in, Ergonomic Handle
RIDGID® 32870 42-A 4-Wheel Heavy Duty Pipe Cutter, 3/4 to 2 in, Ergonomic Handle
RIDGID® 32895, 202 Heavy Duty Wide-Roll Pipe Cutter, 1/8 to 2 in
The RIDGID® 206 and 246 Soil Pipe Cutters utilize an integral ratchet handle centered on the pipe. This is especially useful when cutting pipe in trenches, and helps keep the width of the trench to a minimum. Both use a unique hooking mechanism to make hooking the chain easier. The 206 uses the same chain as the 226 and 276, while the chain on the 246 is larger and allows it to cut 4 in class 22 water main and 2 to 5 in extra heavy duty soil pipe.
RIDGID® 32905, 228 Soil Pipe Assembly Tool, 1-1/2 to 8 in
RIDGID® 32910 Screw Feed Tubing Cutter, 1/8 to 1 in Nominal, Ergonomic Grip Handle
RIDGID® 32910 Screw Feed Tubing Cutter, 1/8 to 1 in Nominal, Ergonomic Grip Handle
RIDGID® 32915, 10 Tubing and Conduit Cutter With E-1240 Wheel, 1/8 to 1 in
Clean, square cuts are easily made on copper, brass, aluminum and thin-wall steel.
RIDGID® 32920 Screw Feed Tubing Cutter, 3/16 to 1-1/8 in Nominal, Ergonomic Grip Handle
RIDGID® 32920 Screw Feed Tubing Cutter, 3/16 to 1-1/8 in Nominal, Ergonomic Grip Handle
RIDGID® 32925, 15 Tubing and Conduit Cutter With E-1240 Wheel, 3/16 to 1-1/8 in
Clean, square cuts are easily made on copper, brass, aluminum and thin-wall steel.
RIDGID® 32930 Screw Feed Tubing Cutter, 5/8 to 2-1/8 in Nominal, Ergonomic Grip Handle
RIDGID® 32930 Screw Feed Tubing Cutter, 5/8 to 2-1/8 in Nominal, Ergonomic Grip Handle
RIDGID® 32975 Close Quarter Tubing Cutter, 1/8 to 5/8 in Nominal, Ergonomic Grip Handle
RIDGID® 32975 Close Quarter Tubing Cutter, 1/8 to 5/8 in Nominal, Ergonomic Grip Handle
Recently Viewed
Justrite® 08300 Horizontal Drum Vent, 2 in NPT/NPS Bung, For Use With 205 L Petroleum Based Solvent Drums, Brass, Brass
Automatic pressure relief ensures safe workplace. No more worrying about pressure building up in your drums. These safety drum vents automatically relieve pressure between 3 and 8 psi (30 to 55 kPa). Vents are tested to allow 61 cubic inch (1-L) of water through a 3/8-in (9.5-mm) pipe nipple in less than 6 seconds. Keep the vent in closed position to prevent flammable vapor from escaping. A built-in flame arrester helps absorb and dissipate heat for added safety. Vacuum relief is automatic on vertically installed vents and manual on horizontally installed vents. Drum vents are FM Approved. For protection and avoidance of high-pressure drum failure while dispelling heat using its flame arrestor.
Wilton® 1010810 Replacement Inner Ring With Dowel Pin, For Use With 400S, 450S, C-1, AW45 and 500S Machinist Bench Vise
Wilton® 1010810 Replacement Inner Ring With Dowel Pin, For Use With 400S, 450S, C-1, AW45 and 500S Machinist Bench Vise
Proto® J848HD Heavy Duty Straight Pipe Wrench, 48 in L, Floating Hook Jaw, Cast Iron Handle, Federal GGG-W-00651D
Proto® J848HD Heavy Duty Straight Pipe Wrench, 48 in L, Floating Hook Jaw, Cast Iron Handle, Federal GGG-W-00651D
CM® 659728 Clevlok® Herc-Alloy® Grab Hook, 1/2 in Trade, 15000 lb Load, 80/100 Grade, Cradle Attachment, Steel Alloy
CM® 659728 Clevlok® Herc-Alloy® Grab Hook, 1/2 in Trade, 15000 lb Load, 80/100 Grade, Cradle Attachment, Steel Alloy
Proto® J836HD Heavy Duty Straight Pipe Wrench, 36 in L, Floating Hook Jaw, Cast Iron Handle, Federal GGG-W-00651D
Proto® J836HD Heavy Duty Straight Pipe Wrench, 36 in L, Floating Hook Jaw, Cast Iron Handle, Federal GGG-W-00651D
Justrite® 08552 Drum Gate Valve, 2 in MNPT Inlet, PTFE Seal, Brass Body, Self-Close Closure
Safe and easy dispensing from horizontal drums. Simply place these faucets on your drum for leakproof dispensing of flammable liquids. Faucets feature an internal flame arrester that prevents flashback of fire into the drum for added safety. Brass construction with a polytetrafluoroethylene (PTFE) seal ensures excellent chemical resistance. Take the worry out of awkward spout position with adjustable models 08910 and 08916. They feature a coupling nut that provides rotation of the spout downward after the faucet is threaded in place. Use Model 08552 for viscous noncorrosive flammables such as adhesives, paint or heavy oils above 2000 SSU (about 30W oil). Faucets are FM Approved. For ensuring safe dispensing of flammable liquids to avoid spills, leaks, and risk of fire hazards.
