OLFA® SKB-2/5B Dual Edge Safety Blade, Trapezoid, Compatible With SK-4 and SK-9 Safety Knives and UTC-1 Utility Knife, Carbon Steel
Reliably Sharp Dual-Edge Safety Blades. Manufactured from premium Japanese tool steel for extreme sharpness with lasting edge retention. Exclusive dual-edge design doubles use.
-
BrandOLFA®
-
UPC091511700220
-
Manufacturer Part NumberSKB-2/5B
-
CountryUSA|Canada
-
MaterialCarbon Steel
-
TypeDual Edge
-
Compatible WithSK-4 and SK-9 Safety Knives and UTC-1 Utility Knife
-
Blade DesignTrapezoid
- Proprietary trapezoid blade design
- Superior sharpness and edge retention for general use
-
Alternative Part Number9612
-
UNSPSC27111501
-
Package DescriptionEACH
-
Catalog
Recently Viewed
OLFA® SKB-2/5B Dual Edge Safety Blade, Trapezoid, Compatible With SK-4 and SK-9 Safety Knives and UTC-1 Utility Knife, Carbon Steel
Reliably Sharp Dual-Edge Safety Blades. Manufactured from premium Japanese tool steel for extreme sharpness with lasting edge retention. Exclusive dual-edge design doubles use.
Apex® 185-00X Socket Head Screwdriver Bit, 1/16 in Socket Point, 1 in OAL
Milwaukee® 48-58-0080 Replacement Safety Chain, 3/4 ton Capacity, 10 ft Standard Lift, 33 lb Chain Pull to Lift Rated Load
Due to prolonged, heavy use some components may need to be replaced. Use only Milwaukee specified replacement parts to achieve maximum life and performance from your Milwaukee Tool. If unable to locate an accessory or repair part please contact Milwaukee at our website.
ITM T30252W Bit Screwdriver, #2 Point Phillips® Point, 1 in OAL
GEARWRENCH® 82305 Punch and Chisel Set, Center/Cold/Long Taper/Pin/Starting Style, 1/4 to 5/8 in Chisel, 3/32 to 3/8 in Punch, 8 Punches, 4 Chisels, 12 Pieces
The GEARWRENCH 12-piece punch and chisel set includes: 4 cold chisels, a center punch, 4 pin punches, a long taper punch, and 2 starter punches ⏤ all the tools you need for a diverse range of professional work. The cold chisels are ideal for cutting metal rivets, bolts, and nuts. The pin punches are designed for final removal, like driving out pins and rivets. Use the center punch to mark center lines and pilot drill locations into metal. Install and remove pins and shafts with the long taper punch, or use the starter punch for starting and installing pins or rivets.
Milwaukee® 48-10-0090 Large Base Assembly, For Use With 4125 Diamond Coring Small Base Stand, 4130 Diamond Coring Large Base Stand and 4136 Diamond Coring Rig
This is the same base assembly included with diamond drill rig model 4130 and 4136 and can be used with models 4125. Use when drilling area is not in confined spaces. This base offers greater support for the diamond drill rig and vacuum assembly than the 48-10-0080 base. Includes two wheels and four leveling screws.
