CLSG-4002 400-ton 2"-stroke Hydraulic
400-TON 2"-STROKE HYDRAULIC RAM - ENECLSG4002>
Recently Viewed
400-TON 2"-STROKE HYDRAULIC RAM - ENECLSG4002>
3" 5/16" WIRE 1/2 T S/BLOCKS-JET272903>
AIRCAT 1/2" AIR/PNEUMATIC DRILL - FLO4450>
GEARWRENCH® 82306 Punch and Chisel Set, Center/Cold/Long Taper/Pin/Starting Style, 1/4 to 1 in Chisel, 15/16 to 3/8 in Punch, 19 Punches, 8 Chisels, 27 Pieces
The GEARWRENCH 27-piece punch and chisel set includes: 8 cold chisels, 3 center punches, 6 pin punches, 4 long taper (drift) punches, 6 starter punches, and a cloth tool roll for storage. Use these cold chisels for cutting metal rivets, bolts, and nuts. Use the pin punch to drive out pins and rivets during final removal. The center punch is used for marking center lines, and pilot drill locations, while long taper punches are used to install and remove pins and shafts and to align holes. Use starter punches for both starting and installing pins and rivets.
GEARWRENCH® 69-513G Soft Face Hammer, 16 in OAL, 1.063 in Dia Flat/Striking Face, 1.5 lb Brass Head, Fiberglass Handle
The GEARWRENCH® line of non-sparking hammers features both brass and copper heads. The brass head hammers are available with both hickory and fiberglass handles and the copper head is available on a durable hickory handle. The striking faces on all of these hammers are machined flat to produce the most even blow distribution. Choose a flame treated hickory handle coated with a clear lacquer and securely wedged into the hammer head for most work, or the temperature and industrial chemical resistant fiberglass handles for heavy duty professional work.
Armstrong® 27-770 Extra Thin Tappet Double Box End Wrench Set, 8 Pieces, 3/8 x 7/16 to 3/4 x 7/8 in, Polished Chrome
Armstrong® 27-770 Extra Thin Tappet Double Box End Wrench Set, 8 Pieces, 3/8 x 7/16 to 3/4 x 7/8 in, Polished Chrome
