Proto® J1431DB Dead Blow Hammer, 14-3/8 in OAL, 2-5/8 in Dia, 4 lb Rubber Head, Fiberglass Handle
Proto® J1431DB Dead Blow Hammer, 14-3/8 in OAL, 2-5/8 in Dia, 4 lb Rubber Head, Fiberglass Handle
-
BrandProto®
-
UPC662679020750
-
Manufacturer Part NumberJ1431DB
-
CountryUSA|Canada
-
Handle MaterialFiberglass
-
Head Length5 in
-
Head MaterialRubber
-
Head Weight4 lb
-
Overall Length14-3/8 in
-
Face Diameter2-5/8 in
- Steel shot
- 30% more driving force with less effort
- Eliminates sting, vibration and rebound
- For maximum safety in non-sparking applications near combustible materials
| Competitor Name | Competitor Part Number |
|---|---|
| Berkshire eSupply | KP4255380 |
| Berkshire eSupply | KP4255380 |
| Berkshire eSupply | KP4255380 |
| Berkshire eSupply | KP4255380 |
-
UNSPSC27111602
-
WarrantyLifetime
Recently Viewed
Proto® J1431DB Dead Blow Hammer, 14-3/8 in OAL, 2-5/8 in Dia, 4 lb Rubber Head, Fiberglass Handle
Proto® J1431DB Dead Blow Hammer, 14-3/8 in OAL, 2-5/8 in Dia, 4 lb Rubber Head, Fiberglass Handle
Proto® TorquePlus™ JSCVT-9S Ratcheting Reversible Combination Wrench Set, Imperial, 9 Pieces, 9/32 to 3/4 in, Full Polished
Proto® TorquePlus™ JSCVT-9S Ratcheting Reversible Combination Wrench Set, Imperial, 9 Pieces, 9/32 to 3/4 in, Full Polished
GENERAL® 1271ST Arch Punch Set, Arch Style, 1/4 to 1 in Punch, 7 Pieces
JET® JT9-505601 R6 Air Drill, 1/2 in Keyed Chuck, 1/2 hp, 4 cfm Air Flow, 90 psi, 8-1/4 in OAL
The JAT-600 is 3/8" aluminum drill build with 800 rpm of speed for the Transportation and MRO markets with reversible design and keyed chuck.
New Crescent Cold Chisels, Wood Chisels, Nail Punches and Pin Punches are designed to deliver the best in durability, safety, and ease-of-use, with extra-large strike caps that are hardened to prevent mushrooming. Shanks of wood chisels and nail punches have a full metal core for extra durability, while cold chisels feature a recessed “control panel” and longer shanks for extra comfort, safety, and access.
PTI 10B-31B Single Strand Hub Type B Roller Chain Sprocket, 20 mm Dia Bore, 163.9 mm OD, #10B-1 Chain, 31 Teeth, 15.875 mm Pitch, C45 Steel
Hub type metric sprockets are available with a minimum plain bore (pilot bore) and some stock finished bore sizes. Any shaft size is possible with our custom bore and keyway capability. Sprockets with hubs are typically fitted to the shaft as a clearance fit. They are held in place with two set screws and a keyway. Clearance fits are popular for light loads and slow speeds. A press fit (or shrink fit to the shaft) is usually preferred for higher speeds or heavier loads as they fit to the shaft more securely than a clearance fit sprocket. Depending on the clearance of the shaft fit, sprockets may work slightly on the shaft causing possible fretting or shaft wear. All sprockets are available with hardened teeth from stock or on request. Press fits usually require the sprocket to be heated for installation to expand the bore. As a heated sprocket cools, it shrinks, conforming to the shaft with a tight grip. A set screw can be used to secure the key. The TL taper bushed sprocket will function like the press fit sprocket and is generally easier to install.
