Apex® 49-B-TX-25 Power Drive Bit, T25 Torx® Point, 3-1/2 in OAL, Steel
Apex® 49-B-TX-25 Power Drive Bit, T25 Torx® Point, 3-1/2 in OAL, Steel
-
BrandApex®
-
UPC697099281498
-
Manufacturer Part Number49-B-TX-25
-
CountryUSA
-
Point SizeT25
-
Point TypeTorx®
-
MaterialSteel
-
Measurement SystemImperial
-
Shank Size1/4 in
-
Shank TypeTorx®
-
Overall Length3-1/2 in
- Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
- Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
- Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
- Power Bits Are Best Used With Quick-Release (QR series) Chucks
-
UNSPSC27112814
-
Package DescriptionEACH
Recently Viewed
Apex® 49-B-TX-25 Power Drive Bit, T25 Torx® Point, 3-1/2 in OAL, Steel
Apex® 480-TX-45X Insert Bit, T45 Torx® Point, 1-1/4 in OAL, Steel
Browning® 1296532 T55L Automatic Torque Limiter, 1-7/16 in Finished Bore, 5-1/2 in OD, 3800 in-lb (1-Spring)/6800 in-lb (2-Spring) Torque
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
United Abrasives-SAIT 52892 Close Coated General Purpose Premium Abrasive Disc With Grinding Aid, 4-1/2 in Dia, 7/8 in Center Hole, 60 Grit, 3A Aluminum Oxide Abrasive
United Abrasives-SAIT 52892 Close Coated General Purpose Premium Abrasive Disc With Grinding Aid, 4-1/2 in Dia, 7/8 in Center Hole, 60 Grit, 3A Aluminum Oxide Abrasive
Dodge® 022725 D-Flex Finished Bore Flexible Type J Sleeve Coupling Flange, 06 Coupling, 1 in Dia Bore, 1-7/32 in L Through Bore, 1.94 in Dia Hub, Sintered Steel
Browning® 767547 VTWS 200 Non-Expansion Normal Duty Take-Up Ball Bearing Unit, 2-7/16 in Dia Bore, 7-1/4 in L x 2-1/2 in W x 5-3/4 in H, 11789 lb Dynamic/8150 lb Static Load
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
