Crescent® 57010 Hex Key, L-Handle Handle, ASME B18.3, Alloy Steel, Black Oxide
Crescent® 57010 Hex Key, L-Handle Handle, ASME B18.3, Alloy Steel, Black Oxide
-
BrandCrescent®
-
UPC082171570100
-
Manufacturer Part Number57010
-
CountryUSA
-
FinishBlack Oxide
-
MaterialAlloy Steel
-
Tip Size5/64 in
-
Measurement SystemImperial
-
Handle TypeL-Handle
-
Arm Length1-7/8 in
-
Arm TypeShort
-
Specifications MetASME B18.3
-
Blade MaterialAlloy Steel
- Precision formed to exact dimensional tolerances for precise fit
- Heat treated, tempered alloy steel provides high strength and resistance to rotational distortion
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 24U697 |
-
UNSPSC27111716
-
Standards/ApprovalsFederal Specification GGG-K-275 AMED 1
-
WarrantyLimited Lifetime
-
Catalog
Recently Viewed
Crescent® 57010 Hex Key, L-Handle Handle, ASME B18.3, Alloy Steel, Black Oxide
Crescent® 57010 Hex Key, L-Handle Handle, ASME B18.3, Alloy Steel, Black Oxide
Hougen® 12156 12000 Annular Cutter, 1-3/4 in Dia Cutter, 1 in D Cutting, M2 HSS, Bright, Weldon with 2-Flat Shank
Hougen "12000 Series" cutters were the original annular cutters invented over 35 years ago. With the most features of any annular cutter, "12000 Series" cutters provide the best performance in the largest variety of materials. Compared to traditional tooling (twist drills, etc.) "12000 Series" cutters can multiply your cutting speed by up to 3 times. And you get longer tool life, a more accurate hole, a better finish, with no burrs. Hougen cutters maximize feed rates because up to 10 cutting edges distribute the cutting load evenly. "12000 Series" cutters convert a smaller area to chips, requiring less horsepower and thrust.
The Starrett 565 Drive Pin Punch is well proportioned, hardened, properly tempered, nicely finished, and have a knurled finger grip. Each punch has the size stamped on the head. 100mm (4") length, 6mm (1/4") Diameter.
MAKE CLEAN, STEADY, CUTS OF ALL WALLCOVERING, SHELF OR PACKAGING PAPER WITH THE WALLPAPER RAZOR KNIFE. THE LARGE CECON PLASTIC HANDLE FITS COMFORTABLE IN THE HAND, PROVIDING EXTRA LEVERAGE AND CONTROL. THE SINGLE EDGE BLADE IS REVSERSIBLE FOR SAFETY AND CAN BE REPLACED WHEN NECESSARY. THE KNIFE FEATURES AN EASY, CLICK TO OPEN, CLICK-TO CLOSE BLADE CHANGE CAPABILITY.
-JWH772907 >
variFLUTE™ 56275 5985 Center Cutting High Performance Regular Length Single End End Mill, 1/8 in Dia Cutter, 0.01 to 0.015 in Corner Radius, 3/8 in Length of Cut, 3 Flutes, 1/8 in Dia Shank, 2 in OAL, AlTiN Coated
variFLUTE™ 56275 5985 Center Cutting High Performance Regular Length Single End End Mill, 1/8 in Dia Cutter, 0.01 to 0.015 in Corner Radius, 3/8 in Length of Cut, 3 Flutes, 1/8 in Dia Shank, 2 in OAL, AlTiN Coated
Klein® 11045-INS Wire Stripper, 18 to 10 AWG Solid Cable, 7 in OAL, Steel Body
This compact, lightweight wire-stripping, cutting tool cuts, strips, loops and gauges 10-18 AWG solid wire. Dual layer orange-over-white insulation protects against electric shock. Exceeds IEC 60900 and ASTM F1505 standards for insulated tools, and are clearly marked with the official 1000-volt rating symbol. Hardened spring steel with precision-ground stripping holes for easy removal of insulation.
