Wire Tong Accessories
CG-87100 APPLETON
CORD AND CABLE CONNECTOR,1" HUB, 15/16" X 1-3/4, .875 - 1.000 CABLE RANGE-APLCG87100 >
CG-87125-S APPLETON
CORD AND CABLE CONNECTOR, 1-1/4" HUB, 1-1/16" X 1-3/4, .875 - 1.000 CABLE RANGE-APLCG87125S >
CLAMP-AID GREAT VALLEY INDUSTRIES
RED CLAMP-AID UP TO 1/2" PK/20-GVICLAMPAID >
Klein 59311 2-3/8" Copper Alligator Clips (ea)
2-3/8" COPPER ALLIGATOR CLIPS (EA)
KLEIN TOOLS 1604-20 Haven's® Cable Grip 0.5-Inch Capacity
Designed for use when light, compact grip is desired and where conductor damage is not a factor
Works with Messenger and Guy Strand cable diameter range of 0.125 to 0.500-Inch (3.18 to 12.70 mm)
Gripping pressure of the knurled jaw is applied to 1/4-Inch (6.35 mm) cable area
Maximum safe load of 5000-Pound (2268 kg)
Made in USA
Individually hand inspected and actuated for proper function
Rigorously tested and pulled to rated load to ensure the highest quality and reliability
KLEIN TOOLS 1628-17 Grip for High Strength Cables 0.5 to 0.75-Inch
Used for Aircraft, EHS, Messenger, Guy Strand cables
Designed for 0.50 to 0.75-Inch (12.7 to 19.05 mm) diameter cable sizes with max safe load of 15,000-Pound (6803 kg)
Double ''V'' grooves give four-point contact, reducing chance of slipping and providing proper alignment of wire and cable
For larger conductors, see our grips with round inside-jaw contour
Made in USA
Locking handle keeps jaw open while grip is placed on cable with a hot stick
KLEIN TOOLS 19312 1-3/32" Steel Mini-gato Clipsr
1-3/32" STEEL MINI-GATOR CLIPS
KLEIN TOOLS 19325 Conduit Reamer
Reamer locks onto screwdrivers, reams and smooths thin-wall conduit
Reams ID and OD at the same time
Two set-screws to fit round- or square-shank screwdrivers
Fits up to 3/8-Inch (10 mm) keystone-tip screwdrivers
Made in USA
NOT for use on power tools
Designed to be used on Electrical Metallic Tubing (EMT)
KLEIN TOOLS 19352 Conduit Reamer
Reamer locks onto screwdrivers, reams and smooths thin-wall conduit
Reams ID and OD at the same time
Two set-screws to fit round- or square-shank screwdrivers
Fits up to 3/8-Inch (10 mm) keystone-tip screwdrivers
Made in USA
NOT for use on power tools
Designed to be used on Electrical Metallic Tubing (EMT)
KLEIN TOOLS 59310 2-3/8" Steel Alligator Clips (ea)
2-3/8" STEEL ALLIGATOR CLIPS (EA)
KLEIN TOOLS 626-24Replacement Tap for Triple Taps
Replacement Tap for Cat. No. 625-24 (Triple Taps)
Lightweight, durable design
Multiple applications
Sold in quantity of 2
Tap sizes: 6-32, 8-32, 10-24
KLEIN TOOLS 626-32 Replacement Tap for 625-32 and 627-20
Replacement Tap for Klein Tools Triple Tap and Six In One Models 625-32, 627-20, 623-32 and 626
Lightweight, durable design
Multiple applications
Sold in quantity of 2
#6, #8, #10 thread spacing
Tap Sizes 10-32, 8-32, 6-32
KLEIN TOOLS 628-20 Replacement Tap for Cat. No. 627-20
Replacement Tap for Cat. No. 627-20
Lightweight, durable design
Multiple applications
Sold in quantity of 2
Tap sizes: 10-24, 12-24, 1/4-20
KLEIN TOOLS 69311 2-3/8" Copper Alligator Clips
2-3/8" COPPER ALLIGATOR CLIPS (NON-INSULATED)
L-7508 LEVITON ELECTRICAL PRODUCTS
1.40-1.75 2"-NPT CORD GRIP - LEVL7508>
L-7902 LEVITON ELECTRICAL PRODUCTS
1/2" LIQUID TIGHT STRAIGHT GRIP-LEVL7902>
L-7903 LEVITON ELECTRICAL PRODUCTS
3/4" , STRAIGHT, MALE, ALUMINUM BODY, LIQUID TIGHT METAL CORE CONDUIT, STRAIN RELIEF GRIP-LEVL7903 >
L-7998 LEVITON ELECTRICAL PRODUCTS
SUPPORT GRIP, BUS DROP SAFETY SPRING 80LB. MAXLOAD, ZINC PLATED-LEVL7998 >
L-9501 LEVITON ELECTRICAL PRODUCTS
SINGLE U EYE, CLOSED MESH, SINGLE WEAVE, STANDARD DUTY SUPPORT WIRE MESH GRIP .500 - .610 CABLE DIAMETER RANGE-LEVL9501 >
RBC-1-1/2X3/8 GREAT VALLEY INDUSTRIES
1-1/2" VINYL COATED BODY CLAMPS-GVIRBC11/2X3/8 >
RBC-1-1/4X3/8 GREAT VALLEY INDUSTRIES
1-1/4" VINYL COATED BODY CLAMPS-GVIRBC11/4X3/8 >
Recently Viewed
AIR TOOL PIN TYPE ANVILS-CHCCO48494>
Milwaukee® 48-62-6046 Floor Scraper Chisel, SDS-Plus Shank, 4 in W Blade, 10 in OAL
The MILWAUKEE® SDS Plus SLEDGE™ Chisels are Milwaukee's Longest Lasting, Most Productive family of chisels. The SDS Plus SLEDGE™ Floor Scraper is engineered with a 5” wide blade to remove 25% more material, maximizing removal of tile, linoleum, laminate, and adhesive. The sharpened, flexible 5" blade cuts under material faster and has a beveled plate edge to prevent material binding. The floor scraper is also equipped with countersunk bolts to reduce loosening. This MILWAUKEE® SDS Plus SLEDGE™ Floor Scraper is designed for use with SDS Plus rotary hammers.
Klein® D507-12 Extra Capacity Adjustable Wrench, 1-1/2 in, Polished Chrome, 12.35 in OAL, Steel
The Klein Tools adjustable wrench is designed with smaller size but the ability to handle heavy-duty jobs. This wrench is manufactured from heat-treated alloy steel for strength and has a high polish chrome finish. It also features a lightweight 12-inch design with an extra-capacity jaw.
CW-1-13/16 1-13/16" 12-pt Chrome Combination
1-13/16" 12-PT CHROME COMBINATION WRENCH-TABCW11316 >
7-PIECE 6-PTFULL POLISH SHORT COMBINATION WRENCH SET-ARS52601 >
DeWALT® MAX FIT® DWHT66569 Round Shank Multi-Bit Screwdriver, 6 Pieces, Plastic
The DEWALT MAX FIT 6-way Multi-bit screwdriver is designed for maximum fit in fasteners and reduces the potential for stripped screws. The 6-way design allows for quick change out of bits as well as storage for your unused bits. This product also features a magnetic screw lock system, keeping fasteners secure during horizontal or vertical usage.
