Wire Tong Accessories
RED CLAMP-AID UP TO 1/2" PK/20-GVICLAMPAID >
Designed for use when light, compact grip is desired and where conductor damage is not a factor
Works with Messenger and Guy Strand cable diameter range of 0.125 to 0.500-Inch (3.18 to 12.70 mm)
Gripping pressure of the knurled jaw is applied to 1/4-Inch (6.35 mm) cable area
Maximum safe load of 5000-Pound (2268 kg)
Made in USA
Individually hand inspected and actuated for proper function
Rigorously tested and pulled to rated load to ensure the highest quality and reliability
Used for Aircraft, EHS, Messenger, Guy Strand cables
Designed for 0.50 to 0.75-Inch (12.7 to 19.05 mm) diameter cable sizes with max safe load of 15,000-Pound (6803 kg)
Double ''V'' grooves give four-point contact, reducing chance of slipping and providing proper alignment of wire and cable
For larger conductors, see our grips with round inside-jaw contour
Made in USA
Locking handle keeps jaw open while grip is placed on cable with a hot stick
1-3/32" STEEL MINI-GATOR CLIPS
1-QT LUBRICANT-KLE51000 >
2-3/8" STEEL ALLIGATOR CLIPS (EA)
2-3/8" COPPER ALLIGATOR CLIPS (EA)
2-3/8" COPPER ALLIGATOR CLIPS (NON-INSULATED)
2" COPPER ALLIGATOR CLIPS
Reamer locks onto screwdrivers, reams and smooths thin-wall conduit
Reams ID and OD at the same time
Two set-screws to fit round- or square-shank screwdrivers
Fits up to 3/8-Inch (10 mm) keystone-tip screwdrivers
Made in USA
NOT for use on power tools
Designed to be used on Electrical Metallic Tubing (EMT)
Forged hook with 5/8-Inchg (1.6 cm) Eye I.D. and 1-7/8-Inch (4.8 cm) Throat Opening
Maximum safe load 750-pounds (340 kg)
Standard on Klein Block & Tackle Packages (Cat. Nos. 1802-30 and H1802-30)
Made in USA
These are NOT occupational protective devices. NOT for human support
Reamer locks onto screwdrivers, reams and smooths thin-wall conduit
Reams ID and OD at the same time
Two set-screws to fit round- or square-shank screwdrivers
Fits up to 3/8-Inch (10 mm) keystone-tip screwdrivers
Made in USA
NOT for use on power tools
Designed to be used on Electrical Metallic Tubing (EMT)
Works with aircraft, EHS, messenger and guy strand cable
Designed for cable sizes from 0.12 to 0.37-Inch (3.05 to 9.40 mm) and has max safe load of 4500-Pound (2041 kg)
Double ''V'' grooves give four-point contact, reducing chance of slipping and providing proper alignment of wire and cable
Made in USA
For larger conductors, see our grips with round inside-jaw contour
Replacement Tap for Cat. No. 625-24 (Triple Taps)
Lightweight, durable design
Multiple applications
Sold in quantity of 2
Tap sizes: 6-32, 8-32, 10-24
Replacement Tap for Klein Tools Triple Tap and Six In One Models 625-32, 627-20, 623-32 and 626
Lightweight, durable design
Multiple applications
Sold in quantity of 2
#6, #8, #10 thread spacing
Tap Sizes 10-32, 8-32, 6-32
Replacement Tap for Cat. No. 627-20
Lightweight, durable design
Multiple applications
Sold in quantity of 2
Tap sizes: 10-24, 12-24, 1/4-20
BLOCK WITH OUT ROPES OR HOOKS
1/2" LIQUID TIGHT STRAIGHT GRIP-LEVL7902>
1.40-1.75 2"-NPT CORD GRIP - LEVL7508>
3/4" , STRAIGHT, MALE, ALUMINUM BODY, LIQUID TIGHT METAL CORE CONDUIT, STRAIN RELIEF GRIP-LEVL7903 >
SUPPORT GRIP, BUS DROP SAFETY SPRING 80LB. MAXLOAD, ZINC PLATED-LEVL7998 >
SINGLE U EYE, CLOSED MESH, SINGLE WEAVE, STANDARD DUTY SUPPORT WIRE MESH GRIP .500 - .610 CABLE DIAMETER RANGE-LEVL9501 >
1-1/2" VINYL COATED BODY CLAMPS-GVIRBC11/2X3/8 >
1-1/4" VINYL COATED BODY CLAMPS-GVIRBC11/4X3/8 >
Recently Viewed
3-inch Type C cam and groove female coupler connected to a 3-inch hose shank, constructed out of heavy-duty brass. It features stainless steel cam arm pins, safety clips, and a standard nitrile rubber (Buna-N) gasket designed for tight, tool-free fluid transfer connections.
3-1/2" STEEL CONDUITS-APLBL350>
OIL RESISTANT , ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES . IN THE SAME MANNER THESE BELTS ARE ADVANTAGES WHERE REVERSE IDLERS HAVE TO BE USED BECAUSE OF SMALLER HEIGHTS.
-PIXA101K>
2-1/2" Standard U-Bolt (Plain)
Size Range: Size 1/2" (15mm) thru 30" (900mm) pipe
Material: Steel
Function: Recommended for support, anchor or guide of pipe.
Approvals: Underwriters Laboratories Listed 3/4" (20mm) thru 12" (300mm). Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 24 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 24.
Maximum Temperature: 750°F (399°C)
Finish: Plain
most commonly manufactured under the Sylvania / LEDVANCE Contractor Series. It serves as a direct, energy-saving replacement for standard 60-Watt incandescent light bulbs, providing the same level of brightness while consuming roughly 86% less electricity
Milwaukee® M12™ 48-20-7438 2-Cutter Rotary Hammer Drill Bit, 1/4 in Drill Bit, 25/64 in SDS-Plus Shank, 18 in D Cutting, Carbide Cutting Edge, 20 in OAL
Milwaukee® M/2™ 2-cutter SDS Plus rotary hammer drill bits are the most durable 2-cutter bits with up to 20% more holes per charge in cordless rotary hammers. The enhanced rebar guards provide increased durability in hard aggregate and rebar. Breaker point pulverize the material more effectively resulting in faster drilling speeds. The variable flute allows for maximum debris extraction leading to up 20% more holes per charge in cordless rotary hammer while making it a very durable bit in corded and cordless rotary hammers. Additionally, M/2™ 2-cutter features a centering tip for exact spot drilling, wear mark indicator indicating when the bit no longer meets ANSI diameter requirements, and a reinforced flute for durability and minimized vibration. The increased life and efficiency of the M/2™ 2-cutter drill bit line provides the ideal solution in general concrete for cordless and corded rotary hammer users.
