Wire Tong Accessories

RED CLAMP-AID UP TO 1/2" PK/20-GVICLAMPAID >

Designed for use when light, compact grip is desired and where conductor damage is not a factor
Works with Messenger and Guy Strand cable diameter range of 0.125 to 0.500-Inch (3.18 to 12.70 mm)
Gripping pressure of the knurled jaw is applied to 1/4-Inch (6.35 mm) cable area
Maximum safe load of 5000-Pound (2268 kg)
Made in USA
Individually hand inspected and actuated for proper function
Rigorously tested and pulled to rated load to ensure the highest quality and reliability

Used for Aircraft, EHS, Messenger, Guy Strand cables
Designed for 0.50 to 0.75-Inch (12.7 to 19.05 mm) diameter cable sizes with max safe load of 15,000-Pound (6803 kg)
Double ''V'' grooves give four-point contact, reducing chance of slipping and providing proper alignment of wire and cable
For larger conductors, see our grips with round inside-jaw contour
Made in USA
Locking handle keeps jaw open while grip is placed on cable with a hot stick

1-3/32" STEEL MINI-GATOR CLIPS

1-QT LUBRICANT-KLE51000 >

2-3/8" STEEL ALLIGATOR CLIPS (EA)

2-3/8" COPPER ALLIGATOR CLIPS (EA)

2-3/8" COPPER ALLIGATOR CLIPS (NON-INSULATED)

2" COPPER ALLIGATOR CLIPS

Reamer locks onto screwdrivers, reams and smooths thin-wall conduit
Reams ID and OD at the same time
Two set-screws to fit round- or square-shank screwdrivers
Fits up to 3/8-Inch (10 mm) keystone-tip screwdrivers
Made in USA
NOT for use on power tools
Designed to be used on Electrical Metallic Tubing (EMT)

Forged hook with 5/8-Inchg (1.6 cm) Eye I.D. and 1-7/8-Inch (4.8 cm) Throat Opening
Maximum safe load 750-pounds (340 kg)
Standard on Klein Block & Tackle Packages (Cat. Nos. 1802-30 and H1802-30)
Made in USA
These are NOT occupational protective devices. NOT for human support

Reamer locks onto screwdrivers, reams and smooths thin-wall conduit
Reams ID and OD at the same time
Two set-screws to fit round- or square-shank screwdrivers
Fits up to 3/8-Inch (10 mm) keystone-tip screwdrivers
Made in USA
NOT for use on power tools
Designed to be used on Electrical Metallic Tubing (EMT)

Works with aircraft, EHS, messenger and guy strand cable
Designed for cable sizes from 0.12 to 0.37-Inch (3.05 to 9.40 mm) and has max safe load of 4500-Pound (2041 kg)
Double ''V'' grooves give four-point contact, reducing chance of slipping and providing proper alignment of wire and cable
Made in USA
For larger conductors, see our grips with round inside-jaw contour

Replacement Tap for Cat. No. 625-24 (Triple Taps)
Lightweight, durable design
Multiple applications
Sold in quantity of 2
Tap sizes: 6-32, 8-32, 10-24

Replacement Tap for Klein Tools Triple Tap and Six In One Models 625-32, 627-20, 623-32 and 626
Lightweight, durable design
Multiple applications
Sold in quantity of 2
#6, #8, #10 thread spacing
Tap Sizes 10-32, 8-32, 6-32

Replacement Tap for Cat. No. 627-20
Lightweight, durable design
Multiple applications
Sold in quantity of 2
Tap sizes: 10-24, 12-24, 1/4-20

BLOCK WITH OUT ROPES OR HOOKS

1/2" LIQUID TIGHT STRAIGHT GRIP-LEVL7902>

1.40-1.75 2"-NPT CORD GRIP - LEVL7508>

3/4" , STRAIGHT, MALE, ALUMINUM BODY, LIQUID TIGHT METAL CORE CONDUIT, STRAIN RELIEF GRIP-LEVL7903 >

SUPPORT GRIP, BUS DROP SAFETY SPRING 80LB. MAXLOAD, ZINC PLATED-LEVL7998 >

SINGLE U EYE, CLOSED MESH, SINGLE WEAVE, STANDARD DUTY SUPPORT WIRE MESH GRIP .500 - .610 CABLE DIAMETER RANGE-LEVL9501 >

1-1/2" VINYL COATED BODY CLAMPS-GVIRBC11/2X3/8 >

1-1/4" VINYL COATED BODY CLAMPS-GVIRBC11/4X3/8 >