Fish Tape Repair & Accessory Kits
3/8" X 50' TAPE MEASURE-LUF306614 >
1" X 25' LOCKING TAPE MEASURE - JWH306606 >
3/4" X 16' TAPE MEASURES/RULES-LUF306592>
3/4" X 16' TAPE MEASURE - JWH306592 >
3/4" X 12' TAPE MEASURES/RULES-LUF306584>
3/8" X 100' TAPE MEASURE-LUF306576 >
3/4" X 25' TAPE MEASURE-LUF2325 >
3/4" X 16' VINTAGE TAPE MEASURE
3/4" X 12' CHROME VINTAGE TAPE MEASURE-LUF2312>
1/2" X 10'(13-MM X 3-M) LUFKIN CHROME TAPE MEASURE
1/2" X 12' TAPE MEASURE-LUF2212 >
1/2" X 10'(13-MM X 3-M) METRIC TAPE
1" X 30' TAPE MEASURE
1/2" X 200' FIBERGLASS TAPE MEASURE-LUF1708 >
Lufkin 150 Foot Tape Measure Model 1707 Spool Windup Works Made in USA
1" X 30' POWER TAPE MEASURE/RULES
3/4" X 25' TAPE MEASURE/TAPE RULE
3/4" X 16' TAPE MEASURE-LUF1316 >
1/2" X 12' TAPE MEASURE-LUF1012>
1/2" X 10' TAPE MEASURE
Recently Viewed
Proto® TorquePlus™ J5424H Standard Length Socket, Imperial, 1/2 in Square Drive, 3/4 in
INTAKE CHECK VALVE-CACP07538A >
Proto Tools 1-1/2"-DR IMPACT UNIVERSAL JOINT PRO J-15670-A
Proto® J15670A Universal Standard Length Impact Joint, Black Oxide, 1-1/2 in Male Drive, 1-1/2 in Female Drive, Female x Male Adapter, Steel
Milwaukee® 48-20-5050 Heavy Duty Thin Wall Core Bit, 3-1/2 in Drill - Fraction, 3.5 in Drill - Decimal Inch, Carbide
Milwaukee's core bits are ideal for large hole drilling where depth is relatively shallow. The core bit cuts a Kerf only. The usable depth of thick wall core bits is 4-3/8 in.. the inside core must be removed by the operator before deeper drilling can be accomplished. The thick wall construction is ideal for larger hammers and more seasoned/cured concrete. A 7-1/2 in. extension is available to allow for the deeper holes to be drilled. The appropriate (Dependant on the diameter) SDS Plus drive shank must be used to drive the core bit. Use 48-20-6155 center pin and 48-20-6160 guide plate for positioning and starting the hole. Thin wall core bits are available from 1 in. to 6 in. diameters. See thick wall core bits for cured concrete and/or larger hammers.
2-1/4 AMP FUSES-LITFLA21/4>
#71 DRILLBIT-ITM207SP0071>
