306592 DO-IT-BEST/HWI PRODUCTS
3/4" X 16' TAPE MEASURE - JWH306592 >
| Cross-Reference Number |
|---|
| 306592 |
Recently Viewed
3/4" X 16' TAPE MEASURE - JWH306592 >
MORSE® 53904 5495 Plain Standard Length Combined Drill and Countersink, 1/8 in Drill - Fraction, 0.125 in Drill - Decimal Inch, 60 deg Included Angle, 60 deg Point Angle, Solid Carbide, Bright
Duracell® PC1300 Cylindrical Battery, Zinc-Manganese Dioxide, 1.5 V DC, 1200 mAh, D
Duracell® PC1300 Cylindrical Battery, Zinc-Manganese Dioxide, 1.5 VDC, 1200 mAh, D
Milwaukee® M12™ 48-20-7467 2-Cutter Rotary Hammer Drill Bit, 7/16 in Drill Bit, 25/64 in SDS-Plus Shank, 16 in D Cutting, Carbide Cutting Edge, 18 in OAL
Milwaukee® M/2™ 2-cutter SDS Plus rotary hammer drill bits are the most durable 2-cutter bits with up to 20% more holes per charge in cordless rotary hammers. The enhanced rebar guards provide increased durability in hard aggregate and rebar. Breaker point pulverize the material more effectively resulting in faster drilling speeds. The variable flute allows for maximum debris extraction leading to up 20% more holes per charge in cordless rotary hammer while making it a very durable bit in corded and cordless rotary hammers. Additionally, M/2™ 2-cutter features a centering tip for exact spot drilling, wear mark indicator indicating when the bit no longer meets ANSI diameter requirements, and a reinforced flute for durability and minimized vibration. The increased life and efficiency of the M/2™ 2-cutter drill bit line provides the ideal solution in general concrete for cordless and corded rotary hammer users.
The Master Lock® 704DPF hasp features a 4-1/2 in (11 cm) long hard wrought steel body. The zinc plated hardened steel hasp provides added strength and weatherability. The hardened steel staple and locking eye resist cutting and sawing. The ribbed hasp plate offers extra strength, and hardened steel locking eye provides strong cut resistance. The limited lifetime warranty provides peace of mind from a brand you can trust.
Dichtomatik 67004836 O-Ring, 242 mm ID x 250 mm OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
