Hose Crimpers
Coilhose® CV500 Hose Crimper, 1/4 to 3/8 in in Capacity
Kuriyama KD165-124RK Service Crimper With Dies, 1-1/4 to 1 in for 2 Wire Capacity, 22 in OAL
Proto® J252G Hose Clamp Plier With Grip, 7-3/4 in OAL, Plastisol Grip Handle
Recently Viewed
1" LIGHT DUTY PLAIN U-BOLT LOCKNUTS-BLNB35011 >
8" HALF-ROUND BASTARD FILES-JK-8HRB >
Weller® 7235 Standard Soldering Tip, For Use With 8200, D550 and 7200 Lightweight Soldering Guns, Solid Copper
Weller® 7235 Standard Soldering Tip, For Use With 8200, D550 and 7200 Lightweight Soldering Guns, Solid Copper
Milwaukee® 48-20-5155 Heavy Duty Thick Wall Core Bit, 4 in Drill - Fraction, 4 in Drill - Decimal Inch
Milwaukee's core bits are ideal for large hole drilling where depth is relatively shallow. The core bit cuts a Kerf only. The usable depth of thick wall core bits is 4-3/8 in. The inside core must be removed by the operator before deeper drilling can be accomplished. The thick wall construction is ideal for larger hammers and more seasoned/cured concrete. A 7-1/2 in. extension is available to allow for the deeper holes to be drilled. The appropriate (Dependant on the diameter) Spline drive shank must be used to drive the core bit. Use 48-20-5199 center pin and 48-20-5174 guide plate for positioning and starting the hole. Thick wall core bits are available from 1 in. to 6 in. diameters. See thin wall core bits for less expensive drilling in new concrete and/or smaller hammers.
GP® 2126D Deep Length Socket, 1/2 in, 13/16 in, 12 Points
Milwaukee® 48-03-3551 Core Bit Adapter, SDS-Plus Adapter Shank, For Use With 86757 1 to 1-1/2 in Thinwall Core Bit, 12 in OAL
12 in. SDS Plus adapter for 1 in. to 1-1/2 in. thin wall core bits. Includes shank only.
