TRANSFER PUMPS
2" 7-HP GAS ENGINE WATER TRANSFER PUMP-VALWP207CMR>
SD-602 115-volt Ac Pump That Delivers Up To 13 Gpm. Designed For Tank Or Barrel
115-VOLT AC PUMP THAT DELIVERS UP TO 13 GPM. DESIGNED FOR TANK OR BARREL MOUNTING-TUTSD602 >
1" AUTOMATIC DIESEL FUEL NOZZLE-PRIN3G >
1" AUTOMATIC DIESEL FUEL NOZZLE-TUTN100DAU10 >
TRANSFER PUMP SWITCH LEVER KITS-TUTKIT700SW>
700-F-6673 REPAIR KITS-TUTKIT120NB>
5.5-HP 2" CHEMICAL/WATER PUMP - WSCIH55GCP2>
1" MANUAL DIESEL FUEL NOZZLES-TUTFRHMN100S>
3/4" MANUAL DIESEL FUEL NOZZLES-TUTFRHMN075S>
1" X 12' FUEL TRANSFER HOSE-TUTFRH10012 >
3/4" X 20' FUEL TRANSFER HOSE-TUTFRH07520 >
115-VOLT 20-GPM TRANSFER PUMPS-TUTFR700>
115-VOLT FLUID TRANSFER PUMPS-TUTFR610C>
12-VOLT DC DIAPHRAGM PUMP - TUTFR410B>
12-VOLT TUTHILL FUEL/TRANSFER PUMP-TUTFR1210C>
FH-3412-SW 3/4" X 12' Fuel Hose That Dispenses Diesel Fuel, Gasoline, Grease, Kerosene And Petroleum Oils. The Fill-rite Hose Is A Blend Of Nit Rile And Pvc External
3/4" X 12' FUEL HOSE THAT DISPENSES DIESEL FUEL, GASOLINE, GREASE, KEROSENE AND PETROLEUM OILS. THE FILL-RITE HOSE IS A BLEND OF NIT RILE AND PVC EXTERNAL MATERIALS-TUTFH3412SW >
40-GPM 10-MICRON PARTICLE FILTER-TUTF4010PM0 >
3/4"-FEMALE PIPE THREAD AUTOMATIC GAS AND FUEL NOZZLE-TUTF3144 >
REPLACEMENT FILTER FOR 1200KTF7018 TOOTHUTF1810PM0 >
901-1.5 1-1/2" 6-40 Gal Per Minute Flow Meter. This Pump Should Be Used For Short Periods Of Time--not Over 30 Minutes-tut9011.
1-1/2" 6-40 GAL PER MINUTE FLOW METER. THIS PUMP SHOULD BE USED FOR SHORT PERIODS OF TIME--NOT OVER 30 MINUTES-TUT9011.5 >
901 4-wheel Fuel Meter With A 1" Inch Outlet. Designed For Transfer Pumps With A Flow Of 6-40
4-WHEEL FUEL METER WITH A 1" INCH OUTLET. DESIGNED FOR TRANSFER PUMPS WITH A FLOW OF 6-40 GPM-TUT901 >
3/4" 5-20 GPM FUEL METER WITH A LARGE EASY TO READ DISPLAY-TUT807CMK >
A-901 METER KNOBS-TUT800G8870>
800-C 3 Wheel Mechanical 3/4" Meter Has A Large Easy To Read Display. Flow Ports Can Be Positioned Vertically Or Horizontally. The Pump Is Designed For Transfer Pumps With A Flow Rate Of 5-20
3 WHEEL MECHANICAL 3/4" METER HAS A LARGE EASY TO READ DISPLAY. FLOW PORTS CAN BE POSITIONED VERTICALLY OR HORIZONTALLY. THE PUMP IS DESIGNED FOR TRANSFER PUMPS WITH A FLOW RATE OF 5-20 GPM-TUT800C >
Recently Viewed
EATON 10250T111 Heavy Duty Oil/Watertight Non-illuminated Pushbutton Operator, 30.5 mm, Black
Eaton's 10250T line of 30.5 mm pushbuttons features a heavy-duty zinc die cast construction. Reliability nibs improve contact reliability even under dry circuit and fine dust conditions. In addition, drainage holes prevent the buildup of liquid inside the operator, which can prevent operation in freezing environments.
Apex® 8136-D Standard Length Socket, Imperial, 1 in Square Drive, 1-1/8 in Socket, 12 Points
Apex® 8136-D Standard Length Socket, Imperial, 1 in Double Hex/Female Square Drive, 1-1/8 in Socket, 12 Points
5128 APEX/COOPER TOOL PRODUCTS 7/8'' 6-Point Standard Impact Socket, 1/2'' Square Drive
1/2" SQUARE DRIVE SOCKET, 6" PT. DOUBLE HEX STANDARD LENGTH, 7/8" X 1-1/2"-APX5128 >
5/8" X 3/4" OPEN END WRENCH - ALL21012 >
11/16" X 3/4" OPEN END WRENCH - ALL21015 >
1-1/16" X 1-1/8" OPEN END WRENCH - ALL21019 >
