6808-UV 8-OZ Ester Oil with UV Dye
8-OZ ESTER OIL W/UV DYE
Recently Viewed
8-OZ ESTER OIL W/UV DYE
Milton® s-976 900 Standard Dual Head Chuck Service Gauge, 10 to 160 psi Pressure, Brass Body, 12-3/4 in OAL, 2 lb Resolution
Dual chuck head Service Gauge has a maximum pressure of 160 psi. Milton® precision engineered Service Gauges provide accurate, long life and trouble-free performance. Plated brass tube and 4 sided nylon indicator bar. 100% Calibrated across all three psi ranges before leaving the factory.
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
Crosby® 1018534, G-209-1, Anchor Shackle, 8.5 ton Load, 1 in, 1.13 in Dia Screw Pin, Hot Dipped Galvanized
Crosby® 1018534 Anchor Shackle, 8.5 ton Load, 1 in, 1.13 in Dia Screw Pin, Hot Dipped Galvanized
12-MM X 1.25X70-MM HEX HEAD CAPSCREW-MET96012070UF >
18"-W X 87"-H SHELVING POSTS/PANEL
