UNION 53121--RAZOR BACK STEEL BLADE WOOD HANDLE 15" W X 44.5" L GENERAL PURPOSE SCOOP SHOVEL
THIS HEAVY-DUTY STEEL SCOOP IS GREAT FOR MOVING GRAIN, MULCH, SOIL, SAND OR EVEN SNOW. IT CAN ALSO BE USED FOR GENERAL CLEAN-UP LEVELING OFF AREAS THAT NEED TO BE FLAT OR FOR SCRAPING DEBRIS FROM HARD SURFACES. THE WESTERN PATTERN RIBBED BLADE WILL HOLD UP DURING EVEN THE TOUGHEST JOBS
-UNI53121>
Recently Viewed
UNION 53121--RAZOR BACK STEEL BLADE WOOD HANDLE 15" W X 44.5" L GENERAL PURPOSE SCOOP SHOVEL
THIS HEAVY-DUTY STEEL SCOOP IS GREAT FOR MOVING GRAIN, MULCH, SOIL, SAND OR EVEN SNOW. IT CAN ALSO BE USED FOR GENERAL CLEAN-UP LEVELING OFF AREAS THAT NEED TO BE FLAT OR FOR SCRAPING DEBRIS FROM HARD SURFACES. THE WESTERN PATTERN RIBBED BLADE WILL HOLD UP DURING EVEN THE TOUGHEST JOBS
-UNI53121>
Gates® Power Transmission PowerGrip® 670H150 Heavy Timing Belt, 1-1/2 in W, 67 in OAL, 1/2 in Pitch, 134 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
30-MM-ID 2-BOLT PRESSED STEEL FLANGE UNIT-FYHSAPFL206FP7 >
Dichtomatik 75102008 O-Ring, 013 Dash Number, 0.426 in ID x 0.566 in OD, FKM, 75 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Gates® Power Transmission Polyflex® JB® 3/5M1150JB Joined Band Light Duty V-Belt, 5M Section, 3/16 in W Top, 45.28 in L Outside, 1/8 in THK, High Modulus Polyurethane
Developed by Gates and produced to patented manufacturing processes, these belts provide more load-carrying capacity at higher speeds to small multiple V-belt precision drives. This results in significant cost savings and improved design freedom.
JASON 800-8-M-50 HTB PROFILE TIMING BELT, 800-MM PITCH LENGTH, 8-MM TOOTH PITCH, 50-MM WIDTH, 8-MM TOOTH, 100 TEETH.
TIMING BELT, SYNCHRONOUS BELT, FIBERGLASS TENSILE CORD, OIL, HEAT AND OZONE RESISTANCE; HIGH TOOTH SHEAR RESISTANCE. NYLON TOOTH COVER
-JAS8008M30 >
