SCRAPERS & TAMPERS
UNION 81100-36" BRUTE ICE CHOPPER/SCRAPER WITH D-HANDLE AND 7" FORGED BLADE
WITH A HEAVY DUTY, 7-INCH-WIDE BLADE, THIS RAZOR-BACK SCRAPER WILL SCRAPE ICE, CONCRETE OR ANYTHING ELSE FROM ROAD OR FLOOR SURFACES. IT CAN BE USED TO REMOVE ROOFING, SIDING AND FLOORING OR TO CHOP AND REMOVE ROOTS OR OTHER GARDEN DEBRIS. IT'S GREAT FOR DIGGING, CLEARING TRENCHES AND LAWN EDGING. THE D-HANDLE PROVIDES MORE CONTROL OF THE BLADE WHILE THE TRONG SOCKET DESIGN ADDS DURABILITY.
-UNI81100 >
TRUPER 31754 TRU PRO FORGED SIDEWALK AND ICE SCRAPER, 7" X 6" HEAD, 48" ASH HANDLE.
SCR-FX 48" PROFESSIONAL GRADE PREMIUM NORTH AMERICAN WHITE ASH HANDLE. WHITE ASH HANDLES GIVE OPTIMUM RATIO OF RESISTANCE AND FLEXIBILITY. 7"? SCRAPER HEAD FOR COMMERCIAL OR RESIDENTIAL USE. USE TO CLEAN SIDEWALKS OR SCRAPE ICE.
-TRU31754 >
TRUPER 30022 A TOUGH WELDED SIDEWALK & ICE SCRAPER, 7" X 4-1/2" HEAD, 54" ASH HANDLE
FOR SCRAPING ICE AND OTHER ENCRUSTED MATERIALS FROM HARD, FLAT SURFACES
-TRU30022 >
Recently Viewed
Browning® 1077684 QD Bushing, 1-3/8 in Dia Bore, 1-7/8 in Dia Barrel, 2-11/16 in Dia Flange, 1.2 in OAL, Ductile Iron
Browning® 1077684 QD Bushing, 1-3/8 in Dia Bore, 1-7/8 in Dia Barrel, 2-11/16 in Dia Flange, 1.2 in OAL, Ductile Iron
Knipex® SmartGrip™ 85 01 250 SBA Auto Adjusting Box Joint Water Pump Plier, 1-1/4 in Nominal, 1-1/4 in L x 1-3/16 in W CRV Steel V-Shape Jaw, Serrated Jaw Surface, 10 in OAL
Knipex® SmartGrip™ 85 01 250 SBA Auto Adjusting Box Joint Water Pump Plier, 1-1/4 in Nominal, 1-1/4 in L x 1-3/16 in W CRV Steel V-Shape Jaw, Serrated Jaw Surface, 10 in OAL
1/2" X 2-1/2" USS Stainless Steel Socket Head Capscrew
Browning® 1078229 Split Taper Bushing, 9/16 in Dia Bore, 1.57 in Small End/1.625 in Large End Dia Barrel, 2-1/2 in Dia Flange, 1-1/4 in OAL, Sintered Steel
External key provides positive drive with no torque on the cap screws. We offer high torque carrying capacity. Double split barrel improves true concentricity. The shaft is gripped with positive clamp fit.
Browning® 1296615 T65L Automatic Torque Limiter, 1-15/16 in Finished Bore, 6-1/2 in OD, 4800 in-lb (1-Spring)/8800 in-lb (2-Spring) Torque
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
BBI 847234 Partially Threaded Cap Screw, 7/16-14, 3 in L Under Head, 5 Grade, Medium Carbon Steel, Zinc CR+3
BBI 847234 Partially Threaded Cap Screw, 7/16-14, 3 in L Under Head, 5 Grade, Medium Carbon Steel, Zinc CR+3
